Hacking SWITCH NOOB PARADISE - Ask questions here

[DrahosR]

Well if the problem was the card it would explain the freeze. If you don't want to test the card can't help you then.

Thank you for your patience. I am testing the card as we speak, but once again we are talking about 6 SIX different cards, not one. And all act the same. If there were inconsistencies in the behavior of some then cards would be suspicious, but consistent behavior on all, I'd think something is off either with my NS or the exploit itself not accounting for all the minute difference in all revisions of NS.

 

[Hayato213]

Thank you for your patience. I am testing the card as we speak, but once again we are talking about 6 SIX different cards, not one. And all act the same. If there were inconsistencies in the behavior of some then cards would be suspicious, but consistent behavior on all, I'd think something is off either with my NS or the exploit itself not accounting for all the minute difference in all revisions of NS.

Well wait for the h2testw result , see what it says about the 128GB, if it doesn't says test finish without error then you got a bootleg.

 

[DrahosR]

Well wait for the h2testw result , see what it says about the 128GB, if it doesn't says test finish without error then you got a bootleg.

How reliable is this software? I purchased the card off Amazon, I can't imagine Amazon selling Samsung's bootlegs.

 

[Hayato213]

How reliable is this software? I purchased the card off Amazon, I can't imagine Amazon selling Samsung's bootlegs.

100% accurate, but regardless where you get the card, you have to test the card, I bought a 1TB and I tested the card.

 

[Draxzelex]

Okay, my Switch is hacked, and has all that good stuff. But I'm curious, is there a free homebrew way to have auto save cloud back up to my Google Drive? Or a way to link my Switch to my Steam account for cross saves?

Neither one of those things exist.

 

[GSR325]

Hello

 

[rs1n]

Ok so I finally finished updating my emunand to 12.0.3 while keeping my sysnand on 10.2. I believe I read somewhere that due to the way e-fuses work, the game slot won't work if my emunand is on a newer firmware. Does this mean I need to rip my cartridge games and use those rips from hereon out?

 

[duidovwud]

I’m getting a “checking if the software can be played” error after installing Ultimate Custom Night .nsp. I already updated Atmosphere and firmware to the latest, and got the latest sig patches. I also tried installing with both Tinfoil and Goldleaf. I tried converting to crypto during the install and fixing the archive bit in Hekate. I also tried different .nsp from different sources and tried installing the .xci. I still can’t figure out why this one game does this. Does anyone have any suggestions?

 

[Veralyn]

I recently deleted kosmos/hekate? via the tinfoil prompt, but i do like to have the cosmos part back.
How can i do this without losing any info

 

[Ferbez]

Sorry if this question may sound dumb, tried to google and weren't able to find answer. I got both of NAND and emuNAND on 10.2.0, and on boot I got "failed to match warmboot with fuses" while sleep obviously don't work. How can I fix this? I'm on hekate 5.5.7 and Atmosphere 0.19.4. Burnt fuses (ODM 7/6) is 14-0 (HOS: 11.0.0 -12.0.1)

 

[DrahosR]

100% accurate, but regardless where you get the card, you have to test the card, I bought a 1TB and I tested the card.

Warning: Only 122590 of 122591 MByte tested.
Test finished without errors.
You can now delete the test files *.h2w or verify them again.
Writing speed: 15.5 MByte/s
Reading speed: 18.3 MByte/s
H2testw v1.4

 

[Draxzelex]

Ok so I finally finished updating my emunand to 12.0.3 while keeping my sysnand on 10.2. I believe I read somewhere that due to the way e-fuses work, the game slot won't work if my emunand is on a newer firmware. Does this mean I need to rip my cartridge games and use those rips from hereon out?

If you already updated your cartridge slot, then the answer is yes. Otherwise if it hasn't been updated yet by using nogc, then you can continue to play cartridges normally.

I’m getting a “checking if the software can be played” error after installing Ultimate Custom Night .nsp. I already updated Atmosphere and firmware to the latest, and got the latest sig patches. I also tried installing with both Tinfoil and Goldleaf. I tried converting to crypto during the install and fixing the archive bit in Hekate. I also tried different .nsp from different sources and tried installing the .xci. I still can’t figure out why this one game does this. Does anyone have any suggestions?

Where did you download the patches from? Not all places have the most up-to-date patches.

I recently deleted kosmos/hekate? via the tinfoil prompt, but i do like to have the cosmos part back.
How can i do this without losing any info

https://sdsetup.com/

Sorry if this question may sound dumb, tried to google and weren't able to find answer. I got both of NAND and emuNAND on 10.2.0, and on boot I got "failed to match warmboot with fuses" while sleep obviously don't work. How can I fix this? I'm on hekate 5.5.7 and Atmosphere 0.19.4. Burnt fuses (ODM 7/6) is 14-0 (HOS: 11.0.0 -12.0.1)

Your fuses are meant for a higher firmware than the one you are currently on. Did you downgrade? And do you own a Mariko or Erista unit?

 

[Veralyn]

I also did a fake link nintendo account via Tinfoil, how can i remove this fake account without deleting all my previous data?

 

[Draxzelex]

I also did a fake link nintendo account via Tinfoil, how can i remove this fake account without deleting all my previous data?

https://gbatemp.net/threads/linkalho-link-your-nintendo-account-offline.573676/

 

[GSR325]

good morning, I keep getting errors when I try to install my games onto my sd card using Awoo, Tinfoil, and Goldleaf.

 

[Hayato213]

Warning: Only 122590 of 122591 MByte tested.
Test finished without errors.
You can now delete the test files *.h2w or verify them again.
Writing speed: 15.5 MByte/s
Reading speed: 18.3 MByte/s
H2testw v1.4

Card looks fine, looks like you issue is something else. Perhaps reformat card and try new cfw files.

 

[Veralyn]

nvm

 

[Ferbez]

Your fuses are meant for a higher firmware than the one you are currently on. Did you downgrade? And do you own a Mariko or Erista unit?

It's Mariko unit with SXCore chip. Nevermind - as I said before that was pretty dumb question, I upgraded to 12.0.3 with Daybreak and now everything works perfect.

 

[Veralyn]

Is there an up to date guide how to make edizon overlay + cheat work?

 

[rs1n]

If you already updated your cartridge slot, then the answer is yes. Otherwise if it hasn't been updated yet by using nogc, then you can continue to play cartridges normally.

How would I know if the slot has been updated? I don't want to accidentally update it by haphazardly testing the nogc and/or autonogc flag (unless that's not possible). All I did was update atmosphere and hekate, then updated my emuMMC via daybreak with the official firmware copied to my SD card. (Never booted into stock/retail mode ever since my initial CFW install back on 10.2) However, I'm not sure whether I need to change my hekate_ipl.ini file. And what happens if I load fusee-primary rather than hekate > fusee-primary or hekate > fusee-secondary? Does going straight from fusee-primary bypass the hekate_ipl.ini file?

My hekate_ipl.ini shows autonogc=1 but I'm not sure what that setting means. Does autonogc=1 mean that nogc has been enabled (i.e. is this the same as nogc=1? or is it actually nogc=0?) And does nogc=1 mean enable "no game cartridge" (i.e. no update)? All the auto's and the double negations have me confused.

EDIT: here my is hekate_ipl.ini if it is useful in any way.

[config]
autoboot=0
autoboot_list=0
bootwait=3
backlight=100
autohosoff=0
autonogc=1
updater2p=0
bootprotect=0
{------ Atmosphere ------}
{Pick this option to launch CFW.}
[Atmosphere]
payload=atmosphere/fusee-primary.bin
{}
{------ Stock ------}
{NOTE: This option does not launch CFW.}
[Stock]
fss0=atmosphere/fusee-secondary.bin
stock=1
emummc_force_disable=1
{}
​