Today I rebooted my Switch and it didn't come back. The unit had AutoRCM enabled, so I expected it to grab the payload from a dongle upon reboot, but it didn't, no matter how many times I tried. I actually have two dongles which used to work, neither worked this time, clip or no clip. Plugging the Switch into a PC also doesn't trigger anything (I was expecting new device detection, could someone check if this is the case with their Switch?). The unit still charges fine, I can see PSU change the voltage from 5V to 15V when I connect the Switch to it.
Considering how rarely I reboot (once in several months) I don't exclude that the USB port got damaged since the last time. It still works with PD supplies though, and just before the reboot I was transferring files via USB with no issues. Is there a USB-C line which is only needed for RCM but not during fast charging or file transfer? Is there anything I could check to diagnose the problem further?
Considering how rarely I reboot (once in several months) I don't exclude that the USB port got damaged since the last time. It still works with PD supplies though, and just before the reboot I was transferring files via USB with no issues. Is there a USB-C line which is only needed for RCM but not during fast charging or file transfer? Is there anything I could check to diagnose the problem further?
Last edited by dimag0g,