Hacking Discussion SX Core Mariko list of non-compatible tools

[masagrator]

Is choi the only way to update Nintendo firmware? I'm guessing people with v2 hacked switches will have to wait for a solution.

With SX OS you can mount XCI with update partition containing desired FW and update using OS.

 

[izy]

Tinfoil got an update, it now detects if you are using an SX CORE and removes the option to use incognito from menus

 

[Simeonism]

Tinfoil got an update, it now detects if you are using an SX CORE and removes the option to use incognito from menus

Thank you! Can confirm this. Only used Incognito (NRO) and TinFoil on my SX Core V2 Switch, no problems so far..

 

[a4854857]

thx a lot for collecting

--------------------- MERGED ---------------------------

I have test the following tools

- works
1.retraoarch
2.checkpoint
3.moonlight-nx
4.nx-shell

- not works
1.emuiibo

 

[HenryMin]

thx a lot for collecting

--------------------- MERGED ---------------------------

I have test the following tools

- works
1.retraoarch
2.checkpoint
3.moonlight-nx
4.nx-shell

- not works
1.emuiibo

Yes, emuiibo and edizon don't work.
Emuiibo module makes some game crash, and edizon and edizon overlay don't work too.
It's just because they don't support SXOS.

 

[Thejigmaster]

Status overlay works while on home screen but if you open it in game you get SXOS crash as well.

 

[izy]

Status overlay works while on home screen but if you open it in game you get SXOS crash as well.

weird because my status overlay works fine when i open it ingame

sysclk overlay also works fine for clock speeds

 

[Thejigmaster]

weird because my status overlay works fine when i open it ingame

sysclk overlay also works fine for clock speeds

I was using this one https://github.com/masagrator/Status-Monitor-Overlay/releases tried opening it in mine craft dungeons to see if the mod I put on there was getting 60 fps and it gave 2168-0002 SXOS error.

 

[izy]

doesnt sysclk manager have a fps overlay option?

 

[Thejigmaster]

doesnt sysclk manager have a fps overlay option?

I don't see any option to see FPS counter only current clocks and system temperatures.

Edit: It doesn't crash if i load the overlay from horizon OS and then open the game, but if you try to load it in game it crashes.

 

[izy]

nvm fps counter is part of salty nx

 

[Thejigmaster]

nvm fps counter is part of salty nx

Yup and @masagrator salty nx fork with nx fps works on HOS home screen but when i boot a game it gives an sxos error again on 3.0.2, tried most recent release SaltyNX-0.3.1a with NX-FPS-0.3 and tried NSP only 0.2 as well, sometimes it doesn't crash SXOS and just leaves black screen on switch with overlay still up have to force shut down.

 

[Thejigmaster]

@squee666 does idn_mitm work on SXOS 3.02 or 3.03? https://gbatemp.net/threads/ldn_mitm-play-local-wireless-supported-games-online.525512/

 

[froid_san]

I'm on V1 and because of the also of the lack of Warning on the installation manual and No announcement on TX part, you have to search the support page manually and read the post about upgrading to see the warning, I've updated carelessly.

I'm on 5.0.010 sysnand using SXOS_beta_v3.0.2, created a emunand, and updated that to 10.0.4.

Emunand works fine and thought all is good and I've dodge the bullet, but then realize I screwed up when I tried getting my prod.keys using lockpick are RCM and found out that I can no longer boot on sysNAND cfw or sysNAND ofw.

I got my prod keys for 5.0.10 but my secure_boot_key is full of "f" and only a few keys we dump compared to my brothers prodkeys when I dump them on 4.1.0. So... I guess lockpick does not fully work on patched switch/mariko units

I believe ChoidujourNX does not burn refuses but I've already attempted to boot on 5.0.10 sysnand, so I don't know if it's still a good idea to downgrade the emunand to 10.0.0 or flash back my original NAND backup as there's no substantial info on the TX support site itself.

So. TLDR I've got a kinda semi brick switch.

 

[a4854857]

Yes, emuiibo and edizon don't work.
Emuiibo module makes some game crash, and edizon and edizon overlay don't work too.
It's just because they don't support SXOS.

So is there any way I can emulate amuiibo on SX OS ?

 

[EmanueleBGN]

What about ChoiDojourNX and Switch Lite?

 

[froid_san]

What about ChoiDojourNX and Switch Lite?

It's the same, Do not use ChoiDojourNX on it.

 

[izy]

@squee666 does idn_mitm work on SXOS 3.02 or 3.03? https://gbatemp.net/threads/ldn_mitm-play-local-wireless-supported-games-online.525512/

it says atmosphere only plugin
i tried lanplay and it detected me connected in the command line on the switch but i didnt have any proper lobby games installed

 

[Thejigmaster]

It's the same, Do not use ChoiDojourNX on it.

Supposedly you can use choidujournx now if you have v3.03 with their firmware update. What TX said is it’ll still brick but SXOS will fix it so you can still boot emunand etc normally basically you won’t notice it’s bricked(?) also if you bricked it before v3.03 run sxupdater with your switch connected to computer via usb debug port and flash firmware v1.3 it unbricks it.

 

[linuxares]

Supposedly you can use choidujournx now if you have v3.03 with their firmware update. What TX said is it’ll still brick but SXOS will fix it so you can still boot emunand etc normally basically you won’t notice it’s bricked(?) also if you bricked it before v3.03 run sxupdater with your switch connected to computer via usb debug port and flash firmware v1.3 it unbricks it.

That just sounds dangerous. Isn't it better if Tinfoil got updated instead?