Hacking SX Pro booting without Jiggle

[dumbledore42]

Hello,
i have installed SX Pro and everything works fine.
I did an upgrade to the newest 6.2 with the newest SX Pro files.
Now I have to use this thing called Jiggle (?) which you put on the right side of the switch.
But I cannot find it anymore. The Dongle i have is always reachable. But because I never use the jiggle I cannot find it anymore.
Any ideas how I can boot with just using the dongle?

 

[Goffrier]

your switch is on?

--------------------- MERGED ---------------------------

with sx os?

--------------------- MERGED ---------------------------

if yes i suggest you to load homebrew app store if you have it and select the homebrew called reboot to rcm

--------------------- MERGED ---------------------------

and from that you just go to the sx menu using vol+ i think when booting with the dongle

--------------------- MERGED ---------------------------

and select autorcm

--------------------- MERGED ---------------------------

if you have a exfat sd card i cant help you since the dev of that app doesnt recommend it on exfat

 

[dumbledore42]

My switch is on but not in the SX mode. It is on on the normal mode.

 

[NateXIII]

You should have taken better care of the Jig, way more important than the dongle.
Short answer to your question is NO.
Try to find it, buy a new one or use a paperclip.

 

[Illuminaticy]

My switch is on but not in the SX mode. It is on on the normal mode.

Nothing you can do then, unless you use a paperclip, boot into RCM, turn on AutoRCM.

or don't lose your jig

 

[dumbledore42]

How can i do it using a paperclip? I have on in front of me.

 

[NateXIII]

https://gbatemp.net/threads/paperclip-rcm-jig.502087/

Be careful though, or your going to mess up your pins.

 

[Illuminaticy]

How can i do it using a paperclip? I have on in front of me.

https://gbatemp.net/threads/paperclip-rcm-jig.502087/ Don't break anything.

 

[S3phi40T]

G to SX OS site, you have manual in there, it's even translated to german.

 

[Illuminaticy]

G to SX OS site, you have manual in there, it's even translated to german.

What would that help him do?

 

[SonyUSA]

What would that help him do?

It shows a picture on how to use a bit of wire (much better than a paper clip, softer/pliable) to RCM jig your switch.

 

[Illuminaticy]

It shows a picture on how to use a bit of wire (much better than a paper clip, softer/pliable) to RCM jig your switch.

Thank you, "Go to sx os website" was pretty uninformative lol

 

[S3phi40T]

There is manual in German and you have pictures of paperclip. It was informative and you are lazy.

Wysłane z mojego Redmi Note 4 przy użyciu Tapatalka

 

[Illuminaticy]

It was informative and you are lazy.

You could have said "It shows pictures there" That's 4 more words, so are you lazy for not giving all the information? It's not my issue so I'm not going to go explore their website lol

 

[dumbledore42]

I try it since half an hour and in my eyes this is not possible with a paperclip. Nothing happens

 

[Dan-the-Rebirth]

Please don't use a paper clip... Use a soft wire and connect the pin to the fan outlet on the top of the switch

 

[dumbledore42]

I also have a soft wire here but what do you mean with connect the pin to the fan outlet?

 

[SonyUSA]

I also have a soft wire here but what do you mean with connect the pin to the fan outlet?

He means instead of going to the ground pin to use the metal fan fins as ground

 

[dumbledore42]

I am really sorry but my english is not that good. You say that I should use the metal fans fins as ground. So what does that mean.
Someone here speaking german?

 

[SonyUSA]

I am really sorry but my english is not that good. You say that I should use the metal fans fins as ground. So what does that mean.
Someone here speaking german?

Don't worry about that, use a piece of wire like in the SX manual, any wire should work fine, you can cut it out from an old cable if you don't have some spare wire.