what would be a "better jig"?Mine uses a thin copper wire. With that paperclip it would be difficult. Try bending them outward slightly. And once you get into RCM. You should install AutoRCM until you get a better jig.
what would be a "better jig"?Mine uses a thin copper wire. With that paperclip it would be difficult. Try bending them outward slightly. And once you get into RCM. You should install AutoRCM until you get a better jig.
Was the chargeing issue with auto rcm fixed through?Mine uses a thin copper wire. With that paperclip it would be difficult. Try bending them outward slightly. And once you get into RCM. You should install AutoRCM until you get a better jig.
what would be a "better jig"?
The system will not charge properly while in RCM with AutoRCM installed. However, it's not much of a problem if you don't accidentally leave the system in RCM. If you do leave it in RCM and the system dies, the system will still trickle charge enough for one to enter RCM and load Hekate or Horizon to charge back to 100%.Was the chargeing issue with auto rcm fixed through?
If you life in Europe then those should work https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/273192667748what would be a "better jig"?
He said he brought it last yearWhat's the switch model number?
What's the switch model number?
what about united statesIf you life in Europe then those should work https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/273192667748
--------------------- MERGED ---------------------------
He said he brought it last year
But atleast mentioning it to him is good.The system will not charge properly while in RCM with AutoRCM installed. However, it's not much of a problem if you don't accidentally leave the system in RCM. If you do leave it in RCM and the system dies, the system will still trickle charge enough for one to enter RCM and load Hekate or Horizon to charge back to 100%.
In short, the problem isn't fixed and never will be because of how it works, but it's not that big of a problem to begin with.
Both Hekate and SX OS have options to boot into OFW and CFW. You would just need a way to load them which includes but not limited to a USB-C cable and a device to send payloads with.plus how would I boot into horizon through autorcm?
That one looks okaywhat about united states
plus how would I boot into horizon through autorcm?
yeah lolXecuters jig is very good. XSOS is also very easy and worth the money. In the USA its $40 well spent.
Stupid question when you insert the jig in the rail the pins are facing you right?
I know you didnt ask me but imho They should work but like mentioned before if you want to go the fully safe route buy sx pro. They are expensive but the jig and especially the dongle kinda make it worth it.@DocAmes1980 would this jig work? https://www.ebay.com/itm/Nintendo-S...&_sacat=0&_nkw=switch+rcm+jig&_from=R40&rt=nc
--------------------- MERGED ---------------------------
yeah lol
I've tried thatLooks better than the one you got. However, have you thought about adjusting the pins (paperclip) of the one you got? Maybe it's touching pins 9 and 2.
Generally if they say it's tested you can hold the liable to it. If they turn out to not work just refund Vie ebay (use PayPal though)Those are all 3D printed jigs there is no way to know the quality.