Will i need a specific version of a rcm jig for my switch?

[frozencat]

Going to buy a moddable switch, will i need a certain rcm jig or can i just buy any one?

 

[linuxares]

Going to buy a moddable switch, will i need a certain rcm jig or can i just buy any one?

Any jig will work in a v1. They just press different pins to do the same effect so just get a quality one.

 

[frozencat]

Any jig will work in a v1. They just press different pins to do the same effect so just get a quality one.

thanks how do i make sure im getting a quality one though? sorry very new to switch modding stuff

 

[linuxares]

thanks how do i make sure im getting a quality one though? sorry very new to switch modding stuff

Generally just stay way from 3d printed once. They can be a real hit and miss. I would recommend to check aliexpress.

 

[frozencat]

Generally just stay way from 3d printed once. They can be a real hit and miss. I would recommend to check aliexpress.

thank you

 

[Hayato213]

There are two different type of jig one is pin 1 and 10 and pin 7 and 10. Like @linuxares said stay away from 3d printed one, you need high quality one like these.

 

[frozencat]

There are two different type of jig one is pin 1 and 10 and pin 7 and 10. Like @linuxares said stay away from 3d printed one, you need high quality one like these.

View attachment 401586

View attachment 401587

thanks is there a diffrence between pin 1 and 10 and pin 7 and 10 ones ?

 

[Hayato213]

thanks is there a diffrence between pin 1 and 10 and pin 7 and 10 ones ?

Not really they are just rcm jig.

 

[frozencat]

Not really they are just rcm jig.

thank you

 

[seith_typhon]

there is no specific jig i would say apart from color.
there is the slider jig where you need to slide all the way down to the right side joycon rail and mod via tergrarcmgui or the jig loader that connect to the switch usb-c port to mod

 

[YoureALoser]

there is no specific jig i would say apart from color.
there is the slider jig where you need to slide all the way down to the right side joycon rail and mod via tergrarcmgui or the jig loader that connect to the switch usb-c port to mod

"Slider jig" no, rcm jig. "Jig loader" no, rcm loader/payload injector.

 

[linuxares]

there is no specific jig i would say apart from color.
there is the slider jig where you need to slide all the way down to the right side joycon rail and mod via tergrarcmgui or the jig loader that connect to the switch usb-c port to mod

"jig loader" is the wrong term.. It's called "rcm loader". the jig is just to bridge pin 10 and ground to enter RCM mode.

 

[seith_typhon]

"jig loader" is the wrong term.. It's called "rcm loader". the jig is just to bridge pin 10 and ground to enter RCM mode.

ah my bad .. i forgotten term use in different countries are different.