Emulation Zelda Breath of the Wild running at 15 FPS at Cemu 1.7.5

[Diego_Oliveira]

Hello people,

I have this configuration on my PC, what can I change on the config to get more FPS? If I put more memory like 16GB I will have better performance?

*AMD Phenom II X6 1055T*
Socket AM3 2.8 Ghz
FSB 4000Mhz

*Asus M4A785TD-M EVO*
Socket AM3, Support PhenomII /AthlonII /Sempron 100 Series Processors;
Support HyperTransport 3.0,
FSB Upto 5200 MT/s,
Memory: 4x DDR3 1800(O.C.)/1600(O.C.)/1333/1066 DIMMs, Dual Channel, ECC/Non-ECC Un-buffered, Max Capacity 16GB,
Slots: 1x PCI-Express x16 Slot (Support PCI-Express 2.0);

*8GB (2x 4GB) Kingstone DDR3*
4 GB 1333MHz DDR3 Non-ECC CL9 DIMM, Standard 256M X 64 Non - ECC 1333MHz 240-pin Unbuffered DIMM ( SDRAM-DDR3, 1.5V, CL9, FBGA, Gold ).

*Nvidia Geforce GTX 1060 6GB*
CUDA Cores 1280
Base Clock (MHz) 1620
Boost Clock (MHz) 1847
Memory Speed 4004 (8008) Mhz
Standard Memory Config 6144MB
Memory Interface Width 192-bit GDDR5
Memory Bandwidth (GB/sec) 192
Bus Support PCI-E 3.0

Thanks...

 

[Wolfy]

Get an Intel CPU or a Ryzen, it'll help your FPS by a lot.

The problem with AMD CPUs is that their IPC is complete garbage compared to Intel, so single-threaded tasks such as with emulators is why high IPC is required.

Basically you need a new CPU man, Intel is your best bet in my opinion( even though I own an FX-8320 )

 

[artik1024]

1. Run CEMU 1.8.0b
2. Update Zelda to 1.2
3. set CEMU to: Upscale filter > bilinear
4. set CEMU to: GPU buffer cache > low
5. Add to your Cemu folder > gameProfiles > your zelda.ini (find it by opening them, name at the top of the doc) and set it like this :

# TLoZ: Breath of the Wild (EUR)

[CPU]
emulateSinglePrecision = true

[Graphics]
disableGPUFence = true

Is it better ?