then sure you won;t have it work. If you only put DIN pin to the OG S-lite LED, it won't do anything since that LED only do blue light and it's not even a RGB LED. I think the guide should mention either you move the rp2040 led to the back next to OG LED or you buy and put extra ws2812b LED to get this mod work
then sure you won;t have it work. If you only put DIN pin to the OG S-lite LED, it won't do anything since that LED only do blue light and it's not even a RGB LED. I think the guide should mention either you move the rp2040 led to the back next to OG LED or you buy and put extra ws2812b LED to get this mod work
I've installed a picofly in a v2 switch, but when I tried turning it on, the battery is dead... I get blue, then 2 yellows, a long pause, then two more yellows. Does that mean it is a problem with reset or could it just be because the battery is low?
And is it safe to charge without all the heat sinks and the sd daughterboard?
I've installed a picofly in a v2 switch, but when I tried turning it on, the battery is dead... I get blue, then 2 yellows, a long pause, then two more yellows. Does that mean it is a problem with reset or could it just be because the battery is low?
And is it safe to charge without all the heat sinks and the sd daughterboard?
read important post link or second link in my sig there u have a morse code list where u can decrypt the morse code. that will tell u what the issue is. and its not just 2 yellow lights u have long and short
read important post link or second link in my sig there u have a morse code list where u can decrypt the morse code. that will tell u what the issue is. and its not just 2 yellow lights u have long and short
It's 2 short, then long pause before another 2 short. My confusion is that there is no code for 4 short, so I assume it's just repeating 2 short but I'm not certain.
(edit): I plan on testing the continuity between rst on the board and rst on the pico. The other possible issue is that I used the rst on the emmc daughterboard, so if it still doesn't work after charging and continuity test, I'll try and solder to the rst on the motherboard (it'll be a pain because it's right between two capacitors, that's why I used the rst on the emmc board).
It's 2 short, then long pause before another 2 short. My confusion is that there is no code for 4 short, so I assume it's just repeating 2 short but I'm not certain.
The diode left pad and 1st resistor right pad are all rst point since they all inter connected. I would feel more happy than pain to connect rst point in such area.
Got the rst connected like jkyoho said! It's now giving a "no glitch reaction" error. I'm using an hwfly cable, is there anything I can do to check or improve the functionality?
Got the rst connected like jkyoho said! It's now giving a "no glitch reaction" error. I'm using an hwfly cable, is there anything I can do to check or improve the functionality?
Here's some images of the install outside of the cpu, I'm going to wait a bit before looking in the cpu to give it time to cool down. (also I know it's really messy, I'm going to clean it all up once it's working.) (edit: partially related, do y'all have any advice for cleaning that copper pad up some?)
clean up ur solder make sure the enameld wires isnt touching anything else it seem ur cpu is laying on 2 solder spots if that couting is damaged that might be ur issue otherwise show some pics from ur mosfet install
Here's some images of the install outside of the cpu, I'm going to wait a bit before looking in the cpu to give it time to cool down. (also I know it's really messy, I'm going to clean it all up once it's working.) (edit: partially related, do y'all have any advice for cleaning that copper pad up some?)View attachment 386139View attachment 386141View attachment 386140
Here's the cable. I know it's really messy, I'm going to try and fix that with a toothbrush and maybe some q-tips.
I haven't cleaned up the solder points yet, but I'm going to wait on that since the issue seems to be with the cpu, as I don't get error codes for the connections to any of the other points.
Only just saw this, here's the emmc connection. As for touch up on the resistors, do you mean all of them or specifically dat0? and what exactly do you mean by touch up?
Here's the cable. I know it's really messy, I'm going to try and fix that with a toothbrush and maybe some q-tips.
I haven't cleaned up the solder points yet, but I'm going to wait on that since the issue seems to be with the cpu, as I don't get error codes for the connections to any of the other points.
Post automatically merged:
Only just saw this, here's the emmc connection. As for touch up on the resistors, do you mean all of them or specifically dat0? and what exactly do you mean by touch up?
Here's the cable. I know it's really messy, I'm going to try and fix that with a toothbrush and maybe some q-tips.
I haven't cleaned up the solder points yet, but I'm going to wait on that since the issue seems to be with the cpu, as I don't get error codes for the connections to any of the other points.
Post automatically merged:
Only just saw this, here's the emmc connection. As for touch up on the resistors, do you mean all of them or specifically dat0? and what exactly do you mean by touch up?
I mean this one. Touch up means you need to make a better soldering either adding flux or new solder to get solid connection to that resistor end. And you have to do something on the sp1 sp2 cap soldering LMAO
what u mean not having a guide? check my sig there is a guid pluse u did some how find out how to solder the rp2040 in correct? so u shouldve found a guide.....
As each year passes, retro games become harder and harder to play, as the physical media begins to fall apart and becomes more difficult and expensive to obtain. The...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
With just a couple weeks after its initial release in the App Store, the Delta emulator for iOS was received with great success, after Apple loosened up its rules in...
With the vast success of Super Mario Maker and its Switch sequel Super Mario Maker 2, Nintendo fans have long been calling for "Maker" titles for other iconic genres...
Retro handheld manufacturer Anbernic has revealed its first clamshell device: the Anbernic RG35XXSP. As the suffix indicates, this handheld's design is inspired by...
After rumour got out about an upcoming NES Edition release for the famed Nintendo World Championships, Nintendo has officially unveiled the new game, titled "Nintendo...
The number of layoffs and cuts in the videogame industry sadly continue to grow, with the latest huge layoffs coming from Microsoft, due to what MIcrosoft calls a...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
As each year passes, retro games become harder and harder to play, as the physical media begins to fall apart and becomes more difficult and expensive to obtain. The...
Ubisoft has today officially revealed the next installment in the Assassin's Creed franchise: Assassin's Creed Shadows. This entry is set in late Sengoku-era Japan...
After a little more than three years of exclusivity with the Epic Games Store, Square Enix has decided to bring their beloved Kingdom Hearts franchise to Steam. The...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
After rumour got out about an upcoming NES Edition release for the famed Nintendo World Championships, Nintendo has officially unveiled the new game, titled "Nintendo...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
The number of layoffs and cuts in the videogame industry sadly continue to grow, with the latest huge layoffs coming from Microsoft, due to what MIcrosoft calls a...
With the vast success of Super Mario Maker and its Switch sequel Super Mario Maker 2, Nintendo fans have long been calling for "Maker" titles for other iconic genres...
i used to go out to the recycling center every couple weeks and look at the crts and other electronics people would drop off. Usually screens were broken or severely scratched from being tossed around. Did find a good one here and there, but never anything like a 1080i widescreen crt.
I have a few of those boat anchors in my basement I tried giving away but no one wanted them, So anyone close to Columbus, Ohio area that wants them, (26", 2x 19") please come get, for free.
Is it piracy if it was released for free? Not in my opinion, but I also think it's not piracy if buying it isn't owning it, and it's not piracy if you can't buy it from the original creators anymore.