Purchased another 10 today, when people stop buying them I’ll stop installing them!
@AKNES any knowledge on plans to alter the stick cap materials? I got a few several batches ago (pictured left) with less glossy better feeling caps, these were still the current version of the sticks, just with more similar to the original caps compared to OEM, I would much prefer these caps, but the last 30+ pairs all I’ve gotten is the cap with a little more of a slick surface (pictured right). Customers don’t seem to complain, just something I’ve observed.
@AKNES any knowledge on plans to alter the stick cap materials? I got a few several batches ago (pictured left) with less glossy better feeling caps, these were still the current version of the sticks, just with more similar to the original caps compared to OEM, I would much prefer these caps, but the last 30+ pairs all I’ve gotten is the cap with a little more of a slick surface (pictured right). Customers don’t seem to complain, just something I’ve observed.
Attachments
Last edited by G33ksquad,
Sorry for the Self promotion, but did you know all the firmware archive are available on
https://gbatemp.net/download/gulikit-kk3-max-ns39-firmware.38417/ ?
https://gbatemp.net/download/gulikit-kk3-max-ns39-firmware.38417/ ?
I bought a few sets around october/november and the ones I installed for my cousin had this problem, but I did eventually get them to calibrate just by retrying the process many times and they work well enough after calibrating. Calibration appeared to just not register any input, even though input was being registered everywhere else including the test screen.
All the sticks I bought have a noticeable "bump" in the calibration test when rotating the sticks in a circle though. When the sticks rotate past the right direction there is a spot where the X axis doesn't reach the maximum value, but when pushed directly right instead of rotated the X axis does hit the maximum value. Seems like this is a known issue. I don't think it affects gameplay (how often do you rotate the stick 360 degrees in gameplay after all) so as long as it doesn't get worse I'm not too bothered by it.
If you buy it from the AKNES Amazon store, you can take a video and show it to me. If it is a product problem, we will replace it for you. （Email: [email protected]）
Don't let our users make do with a bad product.
Post automatically merged:
Love you!!
Post automatically merged:
Sorry Sorry.
I don't know why I missed this message.
Later, GuliKit changed the material of the caps at the end of 2023.
@AKNES This makes more sense! I sold my last pair with the other caps, no worries, I keep my costs so low and prices so affordable that I haven’t had any complaints overall. This product has easily saved at least for me well over 120 pairs of joy cons just in the last year. I really enjoy the sticks and hope GuliKit continues to make them.
For anyone ordering from AliExpress it looks like the holiday has started for the Chinese New Year, I was hoping ordering Tuesday the 6th orders may go out but it looks like I will have to wait. Happy New Year to the team and I look forward to more business in 2024 when they return! Looks like my order may end up be automatically refunded, hopefully I can sort that out with GuliKit when they return as I bought during a promotion with lower pricing!
I ordered from AliExpress sadly, so returning is a pain. I'll order from Amazon next time.
Nice, it has free delivery over $49.
I haven't used Amazon very much in the past because the import tax + shipping + import tax on the shipping cost as well made everything expensive. Until I realized recently that many items have free shipping over $49 which also saves me a bunch of import tax.
At the same time, AliExpress has been a pain in my ass with nearly a dozen packages in total not arriving, and having to wait 3 months (from the shipping date) for a refund each time.
So there is not much reason to use AliExpress over Amazon anymore. It might be slightly cheaper, but at the cost of risking that the package doesn't arrive, or the product being low quality or not what I expected and just counting it as a loss, since returns are just not worth the time or money. Amazon makes international returns so easy.
For me Amazon is 100% more per set, even on sale still 80% more so I can’t justify that when I need 10+ sets at a time. Amazon is fast but overall so much more than AliExpress for me. When GuliKit runs sales over on AliExpress $10.50 a set is just very hard to compete with.
I paid $40 per 2 pairs on AliExpress.
That is the same price as the above Amazon link.
Both offer free shipping, so the price ends up the same.
I have not seen them at the price you mentioned, that is quite a lot cheaper. But are they legit? Seems a bit too good to be true.
@AKNES Any news on Switch Pro Controller Hall Effect josticks coming soon? Would really buy those!
I've bought two pairs on Aliexpress some time ago and haven't had the time to install them. Will do asap.
I've bought two pairs on Aliexpress some time ago and haven't had the time to install them. Will do asap.
Yes, directly from GuliKit they have a listing through their store for a quantity of 10 up to 50. If you wait for sales and buy in bulk you can absolutely get the price from their official store. But you will have to buy in bulk of at least 10 sets.
That wouldn't have cost much more than what I paid for 4. I'll definitely keep it in mind, thanks. I'm sure I'll need more of them eventually, and while I don't know 10 people with a Switch, I could probably make some money on the side by buying JoyCons with busted sticks and fixing them up.
I’m moving to more of a hobby anymore to give me more time with my family but I did Joy Cons only last year and averaged $700-$1k a month earnings just doing it part time. I had less than a 2% fault rate as I did my best to test each set and catch any faulty sticks before I sent them out. If you could find a good source of Joy Cons this has the potential to be a real source of income, I never could break that $1k mark and will find something else, but I had fun.
Last edited by G33ksquad,
I soldered it to all of my 4 joycons and they working and feel like original sticks. Sometimes I have the feeling my aiming is 20% better. But from the caps point of view, no difference to normal caps with the little cuts.
EDIT: I like the KSilver joysticks more than Gulikits, because if something in the future something will break, it is cheaper to replace it. The negative you need solder knowledge, especially for the left analog stick as the soldering points are max. tiny.
Last edited by Ch3ck3rM0n,
Similar threads
-
@
SylverReZ:
They probably said "Hey, why not we combine the two together and make a 'new' DS to sell". -
-
-
@
Veho:
Nothing special about it other than it's more comfortable than the Lite+1
for people with beefy hands. -
-
-
-
-
-
-
@
The Real Jdbye:
@SylverReZ if you could find a v5 DS ML you would have the best of both worlds since the v5 units had the same backlight brightness levels as the DS Lite unlockable with flashme -
-
-
@
BigOnYa:
A woman with no arms and no legs was sitting on a beach. A man comes along and the woman says, "I've never been hugged before." So the man feels bad and hugs her. She says "Well i've also never been kissed before." So he gives her a kiss on the cheek. She says "Well I've also never been fucked before." So the man picks her up, and throws her in the ocean and says "Now you're fucked."+2 -
-
-
@
BakerMan:
anyways, we need to re-normalize physical media+1
if i didn't want my games to be permanent, then i'd rent them -
@
BigOnYa:
Agreed, that why I try to buy all my games on disc, Xbox anyways. Switch games (which I pirate tbh) don't matter much, I stay offline 24/7 anyways.
-
-
@
cearp:
@BakerMan - you can still "own" digital media, arguably easier and better than physical since you can make copies and backups, as much as you like.
The issue is DRM -
@
cearp:
You can buy drm free games / music / ebooks, and if you keep backups of your data (like documents and family photos etc), then you shouldn't lose the game. but with a disk, your toddler could put it in the toaster and there goes your $60
-
-
@
rqkaiju2:
i like physical media because it actually feels like you own it. thats why i plan on burning music to cds -
-
. Saves on time, soap, water and money having to wash them.