Can anyone provide some insight as to why I can't get neek2o to work?
I've taken a few different approaches, but will describe my latest attempt.
I started fresh with a formatted sd card (2gb non-hd fat32 32kb cluster size) and 500gb sata drive in a usb2 enclosure (works fine with usb loaders) also fat32 32kb clusters.
I used the classic modmii v6.0.7 (should be latest) to install the latest neek2o (v75) along with a built nand (used my wii's serial).
Since neek2o supports wbfs, I used wiibackupmanager to add a few games as wbfs files. I also tried using modmii just in case there needed to be at least one game in the games directory.
Regular bootmii loads perfectly off the sd card, but neek2o just hits a black screen, losing controller connection, and requiring holding the power for a few seconds. I let it sit for over an hour before I pulled the plug.
Using the neek2o channel results in the same thing.
I've cleaned up the wii nand, restoring sm4.3, all ioses, and removed priiloader. Updated to HBC v1.1.0 and reinstalled bootmii.
Unfortuantely, I don't have the front piece to the wii, so no flashing drive light for me.
Any ideas?