Hi everyone !
It's been a long time since I came here.
I just recently checked what was new on wiiu and it's awesome, kexploit on 5.5.1 and a beautiful loadiine GX2 !
So I decided to setup my raspberry pi 3 to host all this new stuff, without being forced to have any internet connection.
As I did it for myself I share with you what I did to install the raspberry from scratch (you can find all these steps in the archive) :
PRESENTATION
HOW TO SET UP THE RASPBERRY PI 3
NOTES
Hope you like it
It's been a long time since I came here.
I just recently checked what was new on wiiu and it's awesome, kexploit on 5.5.1 and a beautiful loadiine GX2 !
So I decided to setup my raspberry pi 3 to host all this new stuff, without being forced to have any internet connection.
As I did it for myself I share with you what I did to install the raspberry from scratch (you can find all these steps in the archive) :
PRESENTATION
- This package helps you configure a raspberry 3 to host the WiiU exploits and loadiine.
- No internet connection needed once configured.
- The raspberry acts like a wifi access point.
- The WiiU connects to the raspberry wifi access point.
HOW TO SET UP THE RASPBERRY PI 3
- Install raspbian on your raspberry pi
- Go to https://www.raspberrypi.org/downloads/raspbian/
- Download "Raspbian Jessie Lite" (or Raspbian Jessie but we don't need all the extra stuff)
- Plug your raspberry sdcard on the computer
- Copy the Raspbian image to your sdcard.
- Put the sdcard in the raspberry, then plug :
- A keyboard
- A screen
- An ethernet cable (to your router to have internet, only needed to setup the raspberry)
- Plug the micro usb to turn it on
- Wait for the raspberry to finish the configuration
- Log in the raspberry with:
- login: pi
- password: raspberry
- Enable SSH (on the raspberry):
- Run the command : "sudo raspi-config"
- Select "9 Advanced options" (press enter)
- Select "A4 SSH"
- Select "Yes"
- Exit with multiple ESC
- Retrieve your raspberry IP (on the raspberry):
- Run the command "sudo ifconfig"
- Look for "inet addr:192.xxx.xxx.xxx" in the eth0 part
- Copy the folder "raspberry" of the archive to your raspberry by SSH (on the pc):
- If you are on linux/mac:
- run the command: "scp -r raspberry [email protected]:~"
- If you are on windows:
- download and install "winscp" and connect to your raspberry with the raspberry ip
- copy the folder "raspberry" from your computer to the raspberry in the folder "/home/pi/"
- If you are on linux/mac:
- On the raspberry, run the installation:
- Run the following commands in the raspberry (either with your keyboard/screen or by ssh):
- cd ~/raspberry
- ./install.sh
- Wait for the installation to complete (it takes time)
- the script will automatically download and install all the necessary softwares
- When installation is complete the raspberry reboots
- Run the following commands in the raspberry (either with your keyboard/screen or by ssh):
- If everything's okay, you can now unplug the keyboard, screen and ethernet cable from the raspberry
- Turn-on the WiiU:
- Go to the internet settings
- Connect to the "Pi3-AP" wifi access point (pass:golden45)
- Open the browser and add these bookmarks:
- kexploit: http://172.24.1.1/hax?kexploit10
- loadiine: http://172.24.1.1/hax?loadiine
- Insert your loadiine sdcard to the wiiu
- how to setup the sdcard : https://gbatemp.net/threads/loadiine-gx2.413823/
- Launch "kexploit" from the browser (click on the bookmark)
- Restart the browser
- Launch "loadiine" from the browser (click on the bookmark)
- Enjoy !
NOTES
- How to change the wifi password of your raspberry:
- open the file "etc/hostapd/hostapd.conf"
- replace the field "wpa_passphrase" with your password.
- How to change the wifi name of your raspberry:
- open the file "etc/hostapd/hostapd.conf"
- change the field "ssid".
- This installation only works with the raspberry 3.
- if you want to use a raspberry pi 1 or 2 with this, you'll need a wifi dongle.
- you'll probably have to modify some configuration in "hostapd.conf" to use the proper drivers.
- Tested and working on:
- WiiU EUR 5.5.1
- WiiU USA 5.5.1
- WiiU JPN 5.5.1
- Other firmware should work too.
- You can plug directly the raspberry to your WiiU:
- but from what I tested you have to use a usb cable with two usb connectors plugged to the WiiU.
- otherwise it does not supply enough power.
- the advantage of connecting the raspberry to your WiiU is that it is powered on and powered off automatically.
Hope you like it
Attachments
Last edited by golden45,