Hi,
i have successfully used a Raspberry Pi 3 with Ubuntu Mate for Fusee Gelee!!!
Setup like Ubuntu
Tadaaa!!!
(Now i will setup a button (for example Pimoroni button-shim) to run fusee gelee on raspberry.)
Then, its no pc / Mac / vm or monitor neccessary to run the exploit :-))))
UPDATE:
Here is my first try to run the exploit when the switch in RCM is connected to the Pi 3:
https://github.com/Darkmelman/udev_rule_fusee_gelee_pi3
Note:
to get idVendor and idProduct, run lsusb after connect the switch in RCM mode
UPDATE 2:
Errors corrected on GitHub and idVendor and idProduct added!
Its working fine! ;-))
Enter RCM mode and 3 seconds later fusee runs!
i have successfully used a Raspberry Pi 3 with Ubuntu Mate for Fusee Gelee!!!
Setup like Ubuntu
Tadaaa!!!
(Now i will setup a button (for example Pimoroni button-shim) to run fusee gelee on raspberry.)
Then, its no pc / Mac / vm or monitor neccessary to run the exploit :-))))
UPDATE:
Here is my first try to run the exploit when the switch in RCM is connected to the Pi 3:
https://github.com/Darkmelman/udev_rule_fusee_gelee_pi3
Note:
to get idVendor and idProduct, run lsusb after connect the switch in RCM mode
UPDATE 2:
Errors corrected on GitHub and idVendor and idProduct added!
Its working fine! ;-))
Enter RCM mode and 3 seconds later fusee runs!
Last edited by DarkMelman,