Hello. Brand new OLED modded last week w Hwfly v4 chip. No issues, trained and worked right away once I setup a new SD card for it. First time in Hekate, I plugged in a USB charge cable, and had it charge up to about 95%, then went ahead and setup emunand and all that.
First issue: It kept doing that thing when after I power off the switch, it would reboot if I plugged in a usb cable. Wasn't sure what do to so I turned off the screen in Hekate after powering it on, and when I came back couple hours later, it was down to around 45% battery. (Why the hell would it drain so damn fast with screen off, no games running??)
Second issue: I found that setting in Hekate that stops that usb plugin/wake reboot thing from happening, and stopped that from happening. (At this time Switch was aroune 30% battery according to Hekate screen.
Turned off the switch, plugged in USB C cable, looked for chip light turning on and nothing, screen black so it appeared to be powered off.
Came back after a few hours, turn on Switch and boots into Hekate....battery at 36%?!? wth?? This is the same cable I use to charge my V1 switch for months, no problem.
When I first got into Hekate prior to setting up emunand and such, I checked the battery stats, and it showed everything correctly. Battery was in good health and nothing looked unusual. % of battery life matches up in Hekate, to what was in the switch main menu when you launch atmosphere emunand.
What is going on here based on my story?? Why is the battery draining so fast and why does it not seem to be charging correctly after the initial charge was close to full after a couple hours?? Seemed to be perfectly fine a day or two ago. Is there some setting in Hekate that could be causing this? I had no issues like this with my launch V1 Switch when I converted it to Atmosphere. The V1 battery currently sucks from years of use, but its not behaving like this new OLED is now and is holding a charge longer...what gives?
Anything I should check or toggle on/off in Hekate, based on having a hwfly chip?
First issue: It kept doing that thing when after I power off the switch, it would reboot if I plugged in a usb cable. Wasn't sure what do to so I turned off the screen in Hekate after powering it on, and when I came back couple hours later, it was down to around 45% battery. (Why the hell would it drain so damn fast with screen off, no games running??)
Second issue: I found that setting in Hekate that stops that usb plugin/wake reboot thing from happening, and stopped that from happening. (At this time Switch was aroune 30% battery according to Hekate screen.
Turned off the switch, plugged in USB C cable, looked for chip light turning on and nothing, screen black so it appeared to be powered off.
Came back after a few hours, turn on Switch and boots into Hekate....battery at 36%?!? wth?? This is the same cable I use to charge my V1 switch for months, no problem.
When I first got into Hekate prior to setting up emunand and such, I checked the battery stats, and it showed everything correctly. Battery was in good health and nothing looked unusual. % of battery life matches up in Hekate, to what was in the switch main menu when you launch atmosphere emunand.
What is going on here based on my story?? Why is the battery draining so fast and why does it not seem to be charging correctly after the initial charge was close to full after a couple hours?? Seemed to be perfectly fine a day or two ago. Is there some setting in Hekate that could be causing this? I had no issues like this with my launch V1 Switch when I converted it to Atmosphere. The V1 battery currently sucks from years of use, but its not behaving like this new OLED is now and is holding a charge longer...what gives?
Anything I should check or toggle on/off in Hekate, based on having a hwfly chip?