Hello all,
I bought a used CECHK01 PS3 off ebay a few months ago, and it was obviously opened up before (rubber over torx screw was gone, HDD size was less than 80 GB). When I went through the CFW installation process, using ones that relied on a BD simply wouldn't load, so I had to use a No-BD version. Now, I've been trying to load a disc, and it seems that not only does the PS3 not pull the disc in when it's inserted, but also it simply will not read the disc when it does on startup. I tried to remarry the drive with my root key in dev_usb and with FSM mode on, but I just got a cex_drive_init failure.
So, I opened up the system, and I was surprised to see that there wasn't a BD logic board near the drive. For the CECHK01, is there simply no logic board? Should I order one online and install it with a new drive?
I bought a used CECHK01 PS3 off ebay a few months ago, and it was obviously opened up before (rubber over torx screw was gone, HDD size was less than 80 GB). When I went through the CFW installation process, using ones that relied on a BD simply wouldn't load, so I had to use a No-BD version. Now, I've been trying to load a disc, and it seems that not only does the PS3 not pull the disc in when it's inserted, but also it simply will not read the disc when it does on startup. I tried to remarry the drive with my root key in dev_usb and with FSM mode on, but I just got a cex_drive_init failure.
So, I opened up the system, and I was surprised to see that there wasn't a BD logic board near the drive. For the CECHK01, is there simply no logic board? Should I order one online and install it with a new drive?