Hacking Daybreak failed to setup update

DatGamer

New Member
OP
Newbie
Joined
Jul 15, 2023
Messages
3
Trophies
0
Age
24
XP
24
Country
Hungary
Beginning update setup...
Failed to setup update.
Result: 0x00000402

Im trying to update sysnand from 12.X.X to 16.0.3.
I have the newest Atmosphere and Hakate, so that's not the problem, update files are good, i tried multiple, tried choidujourdx, but that crashes, tried redownloading daybreak, but still nothing.
Checked in a lot of places, but I didn't find this exact error code or any solution that works.
Any help is appreciated!
 

linuxares

The inadequate, autocratic beast!
Global Moderator
Joined
Aug 5, 2007
Messages
13,365
Trophies
2
XP
18,261
Country
Sweden
Download the update files from Darth.

Do you even get a update info screen where it say everything is OK?

Also, make sure you run in full ram mode and not applet mode.
 

DatGamer

New Member
OP
Newbie
Joined
Jul 15, 2023
Messages
3
Trophies
0
Age
24
XP
24
Country
Hungary
i smell fake sdcard, low quality sdcard or maybe even faulty sdcard reader
Can I rule it out any way? I guess if nothing works i'll copy everything over onto a new sd card
Post automatically merged:

Download the update files from Darth.

Do you even get a update info screen where it say everything is OK?

Also, make sure you run in full ram mode and not applet mode.
The files are from darth, i get the info screen, it says it's ok, and it was run in full ram mode.
 

linuxares

The inadequate, autocratic beast!
Global Moderator
Joined
Aug 5, 2007
Messages
13,365
Trophies
2
XP
18,261
Country
Sweden
Can I rule it out any way? I guess if nothing works i'll copy everything over onto a new sd card
Post automatically merged:


The files are from darth, i get the info screen, it says it's ok, and it was run in full ram mode.
I would check the sd card then.

if you wanna test if it's fake, h2testw.
I would else do a chkdsk /f /r /x on it
 

dabrain

New Member
Newbie
Joined
Jul 24, 2023
Messages
3
Trophies
0
Age
36
XP
18
Country
Netherlands
Format card so it's empty and run h2testw
So I format the card Fat32, and used h2testw to test the card. There where no errors.

I also tried the following without any luck

different firmware versions from dartsternie even tried a original firmwaredump from my own switch.

I tried to use AIO installer, but still unable to install the firmware.

Tried to use Choi but that one crashes as well (different versions of it).
 

linuxares

The inadequate, autocratic beast!
Global Moderator
Joined
Aug 5, 2007
Messages
13,365
Trophies
2
XP
18,261
Country
Sweden
So I format the card Fat32, and used h2testw to test the card. There where no errors.

I also tried the following without any luck

different firmware versions from dartsternie even tried a original firmwaredump from my own switch.

I tried to use AIO installer, but still unable to install the firmware.

Tried to use Choi but that one crashes as well (different versions of it).

Hmm, very odd. I would open an issue on the github if so: https://github.com/Atmosphere-NX/Atmosphere
Remember to give as much details as possible!

Normal it's just broken firmware files that cause the error.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    Veho @ Veho: Her boob is the cause of all this current shit :angry: