Hacking Feedback Error code 2002-3540 Nintedo Switch

[DNikiforov]

Good morning

I have version 17.0.1 installed on my Nintendo Switch in my original firmware and 17.0.0 in my emuMMC. The problem I have is that when I want to play an original ROM on my original system I get error 2002-3540 when I save the game.

This gives me to understand that the game cannot be stored in memory due to some kind of error that I am unaware of.

The game in question is Pokemon Scarlet and it only gives me problems with this one at the moment.

Does anyone have a solution or come up with something?

 

[abal1000x]

https://gbatemp.net/threads/picofly-a-hwfly-switch-modchip.622701/post-10333844

 

[DNikiforov]

And, I suppose, that these resistances should be welded again or how are things going?

 

[abal1000x]

And, I suppose, that these resistances should be welded again or how are things going?

Yes. I assume its modded using picofly. Theres resistor in CMD/Dat0 line. The resistor need to be replaced with the suitable value. Usually 100ohms.

 

[DNikiforov]

Perfect, thanks

 

[ChironNZ]

I just had this issue and I fixed it by removing the 47ohm resistor on the reset line and bridging the connection. I left the 47ohm resistor on the clk and cmd. And left the 330ohm on the dat0. Which is how it came from factory. Works perfectly. The chip in picture is the one I had got from AliExpress.

Post automatically merged: Jan 27, 2024

Never mind. It failed again. Time to swap out the dat0 and cmd resistors. Will report back.