Fizeau

Adjust the color of the screen of your Nintendo Switch.

Features:

• Modify the color temperature of the display.
• Filter colors to one single component.
• Apply color corrections: gamma, luminance, and color range.
• Control the screen backlight brightness.
• Schedule settings to be applied to dusk/dawn time, with smooth transitions.

Installation:
Download the latest zip from the release page, unzip it to the root of your sd card (be careful to merge and not overwrite folders), and reboot.
Only the latest version of the Atmosphère CFW is supported.
If you want to use the overlay, you will need to set up Tesla (install Tesla-Menu and ovlloader). This isn't supported on firmware versions prior to 9.0.0.

Supported firmwares:
All firmares are expected working. The software was tested working on 1.0.0, 2.0.0, 6.0.0 and 10.1.0. If you encounter an issue running this on a particular version, please create an issue.
Settings:

• Settings are saved at /switch/Fizeau/config.ini, which you can also edit.
• To reduce the memory usage of the sysmodule, settings are not read continually. Instead, they are applied on application launch. Thus, you will need to launch the client after a reboot to restart Fizeau.

Spoiler: Images

Link: https://github.com/averne/Fizeau/

 

[averne]

This still happen with new update, same as last test version

This works fine for me. Do you have any "unusual" system setting enabled regarding sleep or docked mode?

 

[Medel87]

This works fine for me. Do you have any "unusual" system setting enabled regarding sleep or docked mode?

No, it only happen since you fixed crashes on last versions, test and official, but to be sure, what settings you mean? To take a look at it

 

[averne]

No, it only happen since you fixed crashes on last versions, test and official, but to be sure, what settings you mean? To take a look at it

I'm thinking of "Wake When AC Adapter is Disconnected" in particular.
Otherwise it would be nice if you could confirm it's indeed coming from Fizeau, and that the issue happens with a clean atmosphère install.

 

[Medel87]

I'm thinking of "Wake When AC Adapter is Disconnected" in particular.
Otherwise it would be nice if you could confirm it's indeed coming from Fizeau, and that the issue happens with a clean atmosphère install.

I have this setting enabled, It only happen with last fizeau installed, never had this problem before

If there is someone more with this problem, tell it, please

 

[Flacito]

Thanks a lot. I now use my Switch to fall asleep by reducinf the blue light like Flux does on PC. Your work helps me now with that

 

[lazyguy]

I dont know if this is possible, but can you add a feature where you can automatically set when autobrightness turns on and off.
For example: i want auto brightness to be on when it's 8 am to 10 pm and autobrightness off (and at the lowest brightness state) from 10 pm to 8 am

 

[mathew77]

Guys, did anyone successfully tested the latest 2.4.3-438ffd6 version with the FW 18.0.0? Does it work well?..

 

[zNicoh]

Guys, did anyone successfully tested the latest 2.4.3-438ffd6 version with the FW 18.0.0? Does it work well?..

would like to know the same

 

[averne]

New release: https://github.com/averne/Fizeau/releases/tag/v2.5.0
See changelog for the full description. It should fix many longstanding issues.

 

[jnl1]

The new release keeps throwing me an error when trying to load it via tesla. I am on AMS 1.7.0 and FW17.0.1

 

[averne]

The new release keeps throwing me an error when trying to load it via tesla. I am on AMS 1.7.0 and FW17.0.1

Double check your setup. Did you install every file in the zip?
Does it work in the main application?

 

[Medel87]

New release: https://github.com/averne/Fizeau/releases/tag/v2.5.0
See changelog for the full description. It should fix many longstanding issues.

With this version, the config is not saved, every time I open fizeau (ovl or nro) config is reseted, same happen when reboot

Post automatically merged: Monday at 7:34 PM

I checked the config file, and it's not saved, still the same as default, it only works if I edit the file manually

 

[averne]

With this version, the config is not saved, every time I open fizeau (ovl or nro) config is reseted, same happen when reboot

Post automatically merged: Monday at 7:34 PM

I checked the config file, and it's not saved, still the same as default, it only works if I edit the file manually

Works fine here, just tested with both possible config locations.
Try rebooting? Maybe you didn't delete the chainloader folder and that's messing with your config files. It should get delete automatically on reboot.

 

[Medel87]

Works fine here, just tested with both possible config locations.
Try rebooting? Maybe you didn't delete the chainloader folder and that's messing with your config files. It should get delete automatically on reboot.

I deleted the chainloader folder on contents, what are the two possible config locations? I tested again and now it does not auto apply, it's strange

 

[averne]

I deleted the chainloader folder on contents, what are the two possible config locations? I tested again and now it does not auto apply, it's strange

/switch/Fizeau/config.ini and /config/Fizeau/config.ini

 

[Medel87]

/switch/Fizeau/config.ini and /config/Fizeau/config.ini

I tried both, and it don't work, changes are not saved, I tried editing with OVL and NRO, it only work if I edit it manually as I said, and it does not auto apply, the config only apply when open NRO, open OVL does nothing

Post automatically merged: Monday at 9:20 PM

I was rebooting from ultrahand, and for some reason it was not auto applied, now a reboot with power button fixed everything, I don't understand what was happening, I tried send the files with FTP and with USB, and nothing works, and a simply reboot with power button fixed it? My switch was trolling me, lol

Post automatically merged: Monday at 9:30 PM

Tried with my other switch, and same happened, to fix it, I opened NRO to apply my ini, rebooted with power button, and all is fixed

 

[averne]

I tried both, and it don't work, changes are not saved, I tried editing with OVL and NRO, it only work if I edit it manually as I said, and it does not auto apply, the config only apply when open NRO, open OVL does nothing

Post automatically merged: Monday at 9:20 PM

I was rebooting from ultrahand, and for some reason it was not auto applied, now a reboot with power button fixed everything, I don't understand what was happening, I tried send the files with FTP and with USB, and nothing works, and a simply reboot with power button fixed it? My switch was trolling me, lol

Post automatically merged: Monday at 9:30 PM

Tried with my other switch, and same happened, to fix it, I opened NRO to apply my ini, rebooted with power button, and all is fixed

There a couple inconsistencies in config parsing code that I'm fixing. You can try the build here and check that everything is working.
https://github.com/averne/Fizeau/issues/79#issuecomment-2123387967

 

[Medel87]

There a couple inconsistencies in config parsing code that I'm fixing. You can try the build here and check that everything is working.
https://github.com/averne/Fizeau/issues/79#issuecomment-2123387967

All is working perfect now, config is saved on .ini, autoboot works, and no need to make the strange thing of power button reboot, thanks a lot mate

 

[averne]

Bugfix release for the config saving bug: https://github.com/averne/Fizeau/releases/tag/v2.5.1

 

[sean222]

Latest version (2.5.1) is working great in all aspects on FW 18.0.1.
App/Profiles/Overlay all work well, including applying setting after reboot Thank you!
I don't ever play docked so didn't test this.