Taking the picofly firmware and hardware to the next level...
Announcing the fly2040 suite:
Compatible with most (all?) picofly boards. Stock picofly boards will require extra pull-down resistor(s) and/or a change to the fly2040 firmware to get full support.
Full source code and designs etc available at: fly2040
As I've just completed the (V1) dev - there's a bit of "finishing-off" to do - I'll be creating release packages there soon.
In the meantime - feel free to build and play with it
Announcing the fly2040 suite:
- Enhanced picofly firmware to support led strip control.
- sys-rgb sysmodule for system monitoring and dynamic led strip updates.
- sys-rgb Manager for configuring the sysmodule settings (mode/speed/brightness etc).
- Custom RP2040 KiCad design for easy install.
- Flex 1010 RGB led strip KiCad design.
- Programmer KiCad design.
- Pulse, cycle and rainbow modes run without regular updates from the sysmodule (they run solely on the RP2040).
- Load and temperature modes update the leds color frequently. The sysmodule monitors the CPU load (GPU load coming) or the system temperature and sets the color based on the load/temp value. The color is HSV where hue is the monitored value.
- When the console is put in to stand-by the led strip is turned off.
Compatible with most (all?) picofly boards. Stock picofly boards will require extra pull-down resistor(s) and/or a change to the fly2040 firmware to get full support.
Full source code and designs etc available at: fly2040
As I've just completed the (V1) dev - there's a bit of "finishing-off" to do - I'll be creating release packages there soon.
In the meantime - feel free to build and play with it
Attachments
Last edited by floxcap,