NTR streaming doesn't in any way rely on Luma3DS. I'm positive I used to use it in GW mode in the past.Did some toying around and decided to build a small list of things that work or don't work in Gateway mode. This list may grow if by chance work is done to some of the homebrew applications to run in older environments such as these.
System Firmware:
11.15.0-47X
Homebrew Software List:
FBI
BootNTRSelector
JK's Save ManagerVersion:
v2.13.3
Status:
Working
Notes:
Requires some code tweaking in order to work in Gateway Mode. Plugins that are .plg based will work, however NTR streaming does NOT work due to the lack of Luma3DS. Future versions of this software would need the same treatment in order to work in Gateway Mode.
Source Code:
https://github.com/Nanquitas/BootNTR
CheckpointVersion:
20200508
Status:
Working
Notes:
This software currently has issues with exporting extra data for some titles, an update with a fix is required to fix said issue.
Source Code:
https://github.com/J-D-K/JKSM
Homebrew Launcher WrapperVersion:
v3.7.4
Status:
Not Working
Notes:
Requires Luma3DS to run.
Source Code:
https://github.com/FlagBrew/Checkpoint
Homebrew Launcher LoaderVersion:
v1.0
Status:
Not Working
Notes:
Requires Luma3DS to run.
Source Code:
https://github.com/PabloMK7/homebrew_launcher_dummy
OnionFSVersion:
v1.3
Status:
Not Working
Notes:
Requires a working *hax entrypoint and payload updates in order to work on the latest system firmware version.
Source Code:
https://github.com/yellows8/hblauncher_loader
Version:
v1.4
Status:
Working
Notes:
v2.0+ was built as .3gx plugins rather than .plg plugins for Luma3DS plugin support. Some code tweaking would need to occur in order to have .plg support for these future versions. Features wise the results may vary if by chance someone manages to make this happen.
Source Code:
https://github.com/PabloMK7/OnionFS
Homebrew Launcher Entrypoint List:
NinjhaxCurrently none of the older entrypoints work on the latest system firmware due to either being patched or the payloads not being updated in a long time. Even if they did, sadly the developers of the Homebrew Launcher Menu removed the legacy support that the entrypoints relied on. There is of course a chance for this to return if someone decides to rework the code.
Source Code:
https://github.com/smealum/3ds_hb_menu (Original)
https://github.com/fincs/new-hbmenu (Current)
Version:
v1.X-v2.X
Status:
Not Working
Notes:
Ninjhax 2.X Payloads were never updated to the latest system firmware. Ninjhax 1.X payloads will still work just fine under the respective system firmware versions.
Source Code:
https://github.com/smealum/ninjhax
https://github.com/smealum/ninjhax2.x
Times have changed. Newer versions make the switch all the time to do certain things they didn't do before. If you payed attention I mentioned 2.13.3 and not a much older version.NTR streaming doesn't in any way rely on Luma3DS. I'm positive I used to use it in GW mode in the past.
Nanquitas' Github page mentions nothing about Luma3DS.Times have changed. Newer versions make the switch all the time to do certain things they didn't do before. If you payed attention I mentioned 2.13.3 and not a much older version.
https://github.com/Nanquitas/Luma3DS/releasesNanquitas' Github page mentions nothing about Luma3DS.
That's unrelated. That's for .3gx plugins. You can't do video streaming with that anyways.
Some of the changelogs mention Luma3DS memory layout for streaming.That's unrelated. That's for .3gx plugins. You can't do video streaming with that anyways.
Weird, you can boot into your EmuNAND(s) by holding L while powering the system on, alternatively you can toggle the "Autoboot EmuNAND" option in the Luma3DS configurations (you can access this by holding Select while turning the system on).Have question...
GW3ds on emunand on 11.15.0-47E works, but how to boot emunand in luma3ds?
Booting give arm11 (core 1) error.
Plus if I exit settings in emunand it's go back to ?sysnand?....
One more thing, hblauncher stop loading in luma3ds sysnand (if I swap boot file from luma3ds it's start work again)
I already try autoboot, boot with button, different luma3ds versions and still gateway emunand not load in luma3ds mode. Sysnand in luma3ds works fine. Guess would try to redone it :\Weird, you can boot into your EmuNAND(s) by holding L while powering the system on, alternatively you can toggle the "Autoboot EmuNAND" option in the Luma3DS configurations (you can access this by holding Select while turning the system on).
You can't access the Homebrew Launcher through any methods outside Luma3DS currently, so if it's not working for you in Gateway EmuNAND, it's because support for legacy solutions was cut out, they have to be recoded back into the software.
No idea what you should do, the best I can tell you is to back up your NAND, save data, etc., then remake the entirety of Gateway EmuNAND via the guide.I already try autoboot, boot with button, different luma3ds versions and still gateway emunand not load in luma3ds mode. Sysnand in luma3ds works fine. Guess would try to redone it :\
Downgraded back to 11.2.0-35E with sysupdater and all works, duh...
Would update again to 11.15.0-47E, then swap files from 3ds-sdroot.rar, add cia to updates folder:
0004013000002D02
0004013020001C02
0004001000022000
0004003000009802
0004013000003202
0004013000008002
0004013820000002
Boot in luma3ds, downgrade with sysupdater (this updates). Boot in gateway.
All what I done (write) is right?
How many saves do you have that need to be converted?I'm a little confused on how to progress...
I have Sys 11.13.0-45U. Created EmuNAND. Installed sysUpdater (from profi200) using FBI. Used 3DNUS (from wyatt8740) to download CIAs for 11.1.0-34U. Did the downgrade on sysUpdater.
So now I have Sys 11.13.0-45U still plus Emu 11.1.0-34U. (and godmode9 and fastboot)
Since gateway website went down, it seems impossible to find the "latest" launcher.dat. I have an old launcher.dat from many years ago, which I tried, but didn't work. Probably because it's old like I said. And iirc, Nintendo took down come of their older firmware packages off the servers, which would explain why 3DNUS spat out errors when trying firmware in the 9. mark.
So I don't know how to gateway mode at this point.
Alternatively, if someone has gateway all running properly, can someone convert some of my save files to the luma3ds cia format? (basically forgot to convert the saves before switching from gateway to luma3ds some years back, which is the reason I'm following this guide)
If you can't get it to work, I could convert them.
I haven't. It's been so long since I was in the 3ds hacking scene, so I'm quite out of the loopIf you can't get it to work, I could convert them.
Have you tried doing an 9.2 CTRTransfer to downgrade the emuNAND? The 9.2 CTRTransfer file was all over the internet last I checked.
The file can't be shared here.I haven't. It's been so long since I was in the 3ds hacking scene, so I'm quite out of the loop
Can you point me in the right direction so i can read what that's all about? I don't want to mess anything up