Hacking Gateway Not Loading, Getting Black Screen After Motherboard Swap

[SuperJosh64]

Hi, I swapped motherboards from a unbanned n3ds xl to my banned one and the unbanned motherboard has gateway cfw and the banned one had luma a9lh and gateway at the same time. Every time I load gateway via ds profile exploit it shows the gateway logo then gives me a black screen. I'm using the same micro sd card. Can someone please help me!

 

[Hayleia]

I guess that the emuNAND is readable only on the banned mobo if you use the same SD card as you say.

 

[samiam144]

This may sound simple but by "using the same micro SD card" do you mean the GW SD? Did you switch the regular SD card too? The emunand must match the nand as far as I know so if you haven't switched the cards or switched the emunands then the emunand won't launch.

 

[SuperJosh64]

so what can i do?

--------------------- MERGED ---------------------------

Should I format the emunand

 

[samiam144]

Either you swap the SD cards or extract the emunand from both SD cards then inject them into the other SD card, along with everything else on the card.

 

[SuperJosh64]

I fixed it all I had to do (but only in a last resort) was format the emunand Thanx for al your help!