Hey Gericom! Even tho people are saying GBARunner2 doesn't corrupt the SD card, it does (I think). I downloaded the latest one from WikiTemp and it still freezes Metroid Zero Mission and Pokemon Ruby at random times and now after it freezed after a few times, I can't play Metroid Zero Mission at all. PSA: DON'T TRY FIXING YOUR SD WITH THE WINDOWS UTILITY, IT'Ll MAKE IT WORSE! (My SD card got corrupted and wouldn't boot into main menu so I tried fixing it with windows aaaand now HiyaCFW says my launcher .tmd is too large...)
Did you try the version without cache? I'm currently working on save patches that should fix lots of games with cache. If a game boots first time and not second time (after saving), it's usually a cache issue.
New release from the sd_save branch (8175479, 10-06-2019)
Fat16 support
Intergrated save patches for most save types and versions (should fix a lot of cache issues as well), this means sram patches are not needed anymore for most games. Note that some games may take a bit longer to boot, because of the patching
Fixed dma bug where the upper half of 32 MB roms wrapped to the lower 16 MB part (fixes spyro, probably also the cause of some of the regressions on the wiki)
Save files are now generated of the right size (except for most eeprom games, it will usually be 8kb as 512 cannot be easily detected)
For the save patches, the only important one still missing is FLASH1M_V103. I still need to figure out what changed from 102 to 103 to make it work.
The posted version runs fine on my DSi with the ARM7 version.
If I compile the sd_save branch myself with the latest dev-stuff installed via dkp-pacman and setting the ARM7 flag in common_defs.s it freezes after the boot animation.
Tried both the arm7 and arm9 versions with Twilight++. White screen for both. On 3DS latest twilight version just replaced the gbarunner2.nds and GBARunner2_wramicache.nds.
Thanks for the fix. If you can figure out the FLASH1M_V103 problem, then my saves for Game & Watch Gallery 4 & Narikiri Dungeon 3 will work again. Yu-Gi-Oh! Expert 2 booted fine on the updated version posted so good work so far. I'll keep the former 2 games on the older November 2018 build for now. The Release Lister for Narikiri Dungeon 3 is an EEPROM_V124 64Kbit to let you know. It generated a new save as the old one wasn't recognized. It works on the older build perfectly though.
Also, I used the Lister to check Gensou Suikoden Card Stories and there's no save type at all! I double checked using GBATA and the same info came up with NONE as save type. It's no wonder why I can't rip it using the R4 Rom Dumper tool because without a type, you can't get to it and it wouldn't even let me rip the rom itself which is a non issue in my eyes. What the hell was Konami thinking? I'd have to start over again using the English patch for the game and I wanted to use my save to do it but oh well.
Arm7 version works great, but arm9 doesn't boot at all... Also one more problem, Metroid ZM won't start after saving in the arm7dldi version (I played quite a bit before deciding to restart my dsi and now it just hangs at a white screen after the gba bios)
Can somebody please explain how to get this latest build working from Twilight Menu ++ on 3DS. Managed to get GBARunner2 to start but every time I load a game it gets about 30 seconds onto it then crashes (Yes EVERY Game!)
Arm7 version works great, but arm9 doesn't boot at all... Also one more problem, Metroid ZM won't start after saving in the arm7dldi version (I played quite a bit before deciding to restart my dsi and now it just hangs at a white screen after the gba bios)
Can somebody please explain how to get this latest build working from Twilight Menu ++ on 3DS. Managed to get GBARunner2 to start but every time I load a game it gets about 30 seconds onto it then crashes (Yes EVERY Game!)
@Gericom I played around a little and only changing the installed DevkitARM isn't enough to make it compile correctly.
I used the windows builds with msys2 shell as only those old versions of devkitARM were still downloadable somewhere.
DevkitARM revisions r42, r43, r44, r45 don't compile with
linking GBARunner2.elf
c:/devkitpro/devkitarm/bin/../lib/gcc/arm-none-eabi/6.3.0/../../../../arm-none-eabi/bin/ld.exe: address 0x1008050 of C:/Users/lel/GBARunner2/arm9/GBARunner2.elf section `.itcm' is not within region `itcm'
c:/devkitpro/devkitarm/bin/../lib/gcc/arm-none-eabi/6.3.0/../../../../arm-none-eabi/bin/ld.exe: address 0x1008050 of C:/Users/lel/GBARunner2/arm9/GBARunner2.elf section `.itcm' is not within region `itcm'
collect2.exe: error: ld returned 1 exit status
make[2]: *** [/c/Users/lel/GBARunner2/arm9/Makefile:123: /c/Users/lel/GBARunner2/arm9/GBARunner2.elf] Error 1
make[1]: *** [Makefile:107: build] Error 2
make[1]: Leaving directory „/c/Users/lel/GBARunner2/arm9“
make: *** [Makefile:31: arm9/GBARunner2.elf] Error 2
Revisions r47, r52-2 compile ARM7_DLDI without errors, size is 207 KB, so 10 KB bigger compared to your build, freezes after booting a game that works with your builds.
Revisions r48-win64, r50-4, r51-1 don't compile with
linking GBARunner2.elf
c:/devkitpro/devkitarm/bin/../lib/gcc/arm-none-eabi/8.1.0/../../../../arm-none-eabi/bin/ld.exe: address 0x1008050 of C:/Users/lel/GBARunner2/arm9/GBARunner2.elf section `.itcm' is not within region `itcm'
c:/devkitpro/devkitarm/bin/../lib/gcc/arm-none-eabi/8.1.0/../../../../arm-none-eabi/bin/ld.exe: address 0x1008050 of C:/Users/lel/GBARunner2/arm9/GBARunner2.elf section `.itcm' is not within region `itcm'
collect2.exe: error: ld returned 1 exit status
make[2]: *** [/c/Users/lel/GBARunner2/arm9/Makefile:123: /c/Users/lel/GBARunner2/arm9/GBARunner2.elf] Error 1
make[1]: *** [Makefile:107: build] Error 2
make[1]: Leaving directory „/c/Users/lel/GBARunner2/arm9“
make: *** [Makefile:31: arm9/GBARunner2.elf] Error 2
Revision r49-1 doesn't compile with
linking GBARunner2.elf
c:/devkitpro/devkitarm/bin/../lib/gcc/arm-none-eabi/8.1.0/../../../../arm-none-eabi/bin/ld.exe: address 0x1008050 of C:/Users/lel/GBARunner2/arm9/GBARunner2.elf section `.itcm' is not within region `itcm'
c:/devkitpro/devkitarm/bin/../lib/gcc/arm-none-eabi/8.1.0/../../../../arm-none-eabi/bin/ld.exe: address 0x1008050 of C:/Users/lel/GBARunner2/arm9/GBARunner2.elf section `.itcm' is not within region `itcm'
collect2.exe: error: ld returned 1 exit status
make[2]: *** [/c/Users/lel/GBARunner2/arm9/Makefile:123: /c/Users/lel/GBARunner2/arm9/GBARunner2.elf] Error 1
make[1]: *** [Makefile:107: build] Error 2
make[1]: Leaving directory „/c/Users/lel/GBARunner2/arm9“
make: *** [Makefile:31: arm9/GBARunner2.elf] Error 2
@Gericom I played around a little and only changing the installed DevkitARM isn't enough to make it compile correctly.
I used the windows builds with msys2 shell as only those old versions of devkitARM were still downloadable somewhere.
DevkitARM revisions r42, r43, r44, r45 don't compile with
linking GBARunner2.elf
c:/devkitpro/devkitarm/bin/../lib/gcc/arm-none-eabi/6.3.0/../../../../arm-none-eabi/bin/ld.exe: address 0x1008050 of C:/Users/lel/GBARunner2/arm9/GBARunner2.elf section `.itcm' is not within region `itcm'
c:/devkitpro/devkitarm/bin/../lib/gcc/arm-none-eabi/6.3.0/../../../../arm-none-eabi/bin/ld.exe: address 0x1008050 of C:/Users/lel/GBARunner2/arm9/GBARunner2.elf section `.itcm' is not within region `itcm'
collect2.exe: error: ld returned 1 exit status
make[2]: *** [/c/Users/lel/GBARunner2/arm9/Makefile:123: /c/Users/lel/GBARunner2/arm9/GBARunner2.elf] Error 1
make[1]: *** [Makefile:107: build] Error 2
make[1]: Leaving directory „/c/Users/lel/GBARunner2/arm9“
make: *** [Makefile:31: arm9/GBARunner2.elf] Error 2
Revisions r47, r52-2 compile ARM7_DLDI without errors, size is 207 KB, so 10 KB bigger compared to your build, freezes after booting a game that works with your builds.
Revisions r48-win64, r50-4, r51-1 don't compile with
linking GBARunner2.elf
c:/devkitpro/devkitarm/bin/../lib/gcc/arm-none-eabi/8.1.0/../../../../arm-none-eabi/bin/ld.exe: address 0x1008050 of C:/Users/lel/GBARunner2/arm9/GBARunner2.elf section `.itcm' is not within region `itcm'
c:/devkitpro/devkitarm/bin/../lib/gcc/arm-none-eabi/8.1.0/../../../../arm-none-eabi/bin/ld.exe: address 0x1008050 of C:/Users/lel/GBARunner2/arm9/GBARunner2.elf section `.itcm' is not within region `itcm'
collect2.exe: error: ld returned 1 exit status
make[2]: *** [/c/Users/lel/GBARunner2/arm9/Makefile:123: /c/Users/lel/GBARunner2/arm9/GBARunner2.elf] Error 1
make[1]: *** [Makefile:107: build] Error 2
make[1]: Leaving directory „/c/Users/lel/GBARunner2/arm9“
make: *** [Makefile:31: arm9/GBARunner2.elf] Error 2
Revision r49-1 doesn't compile with
linking GBARunner2.elf
c:/devkitpro/devkitarm/bin/../lib/gcc/arm-none-eabi/8.1.0/../../../../arm-none-eabi/bin/ld.exe: address 0x1008050 of C:/Users/lel/GBARunner2/arm9/GBARunner2.elf section `.itcm' is not within region `itcm'
c:/devkitpro/devkitarm/bin/../lib/gcc/arm-none-eabi/8.1.0/../../../../arm-none-eabi/bin/ld.exe: address 0x1008050 of C:/Users/lel/GBARunner2/arm9/GBARunner2.elf section `.itcm' is not within region `itcm'
collect2.exe: error: ld returned 1 exit status
make[2]: *** [/c/Users/lel/GBARunner2/arm9/Makefile:123: /c/Users/lel/GBARunner2/arm9/GBARunner2.elf] Error 1
make[1]: *** [Makefile:107: build] Error 2
make[1]: Leaving directory „/c/Users/lel/GBARunner2/arm9“
make: *** [Makefile:31: arm9/GBARunner2.elf] Error 2
Rayman Advance works afaik. Rayman 3 as well iirc. Wario Land sadly has a timing issue with that end of level portal. It may be possible to get past it once an ingame menu has been implemented.
I need some help I'm getting an error and i don't know how to fix.
It says that cant find the file main even though it is in the folder how do i fix it?
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
Another video game prototype has been found and preserved, and this time, it's none other than the game that spawned an entire franchise beloved by many, the very...
Anbernic is back with yet another retro handheld device. The upcoming RG28XX is another console sporting the quad-core H700 chip of the company's recent RG35XX 2024...
Nintendo has recently announced through their social media accounts that a new Indie World stream will be airing tomorrow, scheduled for April 17th, 2024 at 7 a.m. PT...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
Two classic titles join the Nintendo Switch Online Expansion Pack game lineup. Available starting April 24th will be the motorcycle racing game Extreme G and another...
The highly popular and accurate FPGA hardware, MisterFGPA, has received today a brand new update with a long-awaited feature, or rather, a new core for hardcore...
Nintendo has recently announced through their social media accounts that a new Indie World stream will be airing tomorrow, scheduled for April 17th, 2024 at 7 a.m. PT...
In 2017, the United States Federal Communications Commission (FCC) repealed net neutrality. At the time, it was a major controversy between internet service providers...