Hacking Gaming Tutorial
Updated
How to make Skylanders NFC Cards! (Covers making, resetting, traps and swappers)
In this guide I'll show you how to make skylanders nfc cards, reset them, how to make straps and how to make swappers. If you want more details you can watch my youtube video here:
Requirements (Links for amazon are examples you don't have to buy exactly those)
- ACR122U NFC Reader/Writer
- ACR122U Drivers
- NFC Cards/Tags that are 13.56MHZ, have a Rewritable UID and have 1K Storage
- MifareWindowsTool (The program was taken down by the dev this is a reupload) | VirusTotal
- Skylander Dumps (These dumps are from The Vault discord server)
- Install the drivers for your NFC Reader/Writer
Making NFC Cards
- Install and open
MifareWindowsTool
and put your NFC Tag/Card on your Reader, now pressREAD TAG
and thenStart decode & Read tag
if a window pops up calledDump
then pressClose
, but if it didn't and you got an error try again until it works and try re-plugging your NFC Reader. - Now press
WRITE TAG
and clickNo
if it asks to Decrypt now make sure underTag Type
chinese magic unlocked/gen1
is automatically checked if it isn't you need te redo step 1 again until it is. - Now under
Source dump
select a dump file you've downloaded from The Vault and pressStart Cloning
if it saysFinished
and in the console it saysDone, 64 of 64 blocks written.
then it worked if it didn't go to the resetting step and after that try again. - Now use it as you would use a regular Skylander!
Resetting
- Open
MifareWindowsTool
and clickTOOLS / OPTIONS
thenChange UID
and set theNew UID
to00000000000000000000000000000000
and checkFormat tag
now clickChange UID
. - If it says
UID: --> 00000000!
then it worked, if it says something else reopenMifareWindowsTool
and try re-plugging your NFC Reader and retry step 1.
Making Traps
- Follow
Making NFC Cards
until step 3 but instead of selecting a Skylander select a trap from The Vault dump files. - Put the NFC Card/Tag on the portal when trying to trap a villain, not in the trap slot just on the portal like a normal Skylander.
The process for making swappers is almost the same as for regular skylander but you need 2 cards/tags, 1 for the top and the other for the bottom so just followMaking Swappers
Making NFC Cards
twice.
Last edited by TheBiemGamer,