Hi,
thanks to anyone who is reading this. A while ago I tried to follow a guide to install a trinket m0 internally in my switch. It didn’t go well as it basically just wouldn’t work. I ended up deslodering all of the points that I had made and removed the trinket m0. However, now I can’t get my switch to boot into cfw at all. Here’s what happens :
my switch will boot up normally into OFW if I just press the power button.
if I hold vol + and power my switch boots up normally into OFW.
If I place my jig into the joycon rail and put the payload injector (SX Pro) into the USB port, the switch just remains on a black screen and the led in the SX Pro doesn’t light up when I press volume + and power. The jig and the payload injector both work on others switches.
i can provide images if that would help. Please if you can help try and bare with me as I don’t really know what I’m talking about when it comes to the specifics of this.
thanks.
thanks to anyone who is reading this. A while ago I tried to follow a guide to install a trinket m0 internally in my switch. It didn’t go well as it basically just wouldn’t work. I ended up deslodering all of the points that I had made and removed the trinket m0. However, now I can’t get my switch to boot into cfw at all. Here’s what happens :
my switch will boot up normally into OFW if I just press the power button.
if I hold vol + and power my switch boots up normally into OFW.
If I place my jig into the joycon rail and put the payload injector (SX Pro) into the USB port, the switch just remains on a black screen and the led in the SX Pro doesn’t light up when I press volume + and power. The jig and the payload injector both work on others switches.
i can provide images if that would help. Please if you can help try and bare with me as I don’t really know what I’m talking about when it comes to the specifics of this.
thanks.