I have bricked my wii u with cbhc, what is the solution

lyokohack

Well-Known Member
OP
Member
Joined
Apr 2, 2018
Messages
294
Trophies
0
Age
27
XP
1,056
Country
France
hi everyone

i tried to install cbhc with haxchi and i bricked the console before the new exploit came out

do i have a chance to unbrick this console with Tiramisu and the news tools
 

godreborn

Welcome to the Machine
Member
Joined
Oct 10, 2009
Messages
38,470
Trophies
3
XP
29,200
Country
United States
did you use sdio? I have no idea why they're named that way. the rawnand.bin sounds like your mlc, but it may be everything, just not sure. do you have the otp.bin? you need either your slc.bin, which is 528MBs or the opt.bin which is 1KB.
 

godreborn

Welcome to the Machine
Member
Joined
Oct 10, 2009
Messages
38,470
Trophies
3
XP
29,200
Country
United States
if you have an sd card with redNAND, it may be possible to fix it. you'd have to use sdio, op, to get the slc, then flash it with a hardmod. it should work, but your system will revert back to that time. sdio won't get you the otp.bin. the rednand nand dumper doesn't do otp or seeprom from what I remember. wait, nm, I think you might be screwed, because you need to use nandfixer on the slc, since the nand dumper misses about 16MBs. iirc, you need the otp.bin for that. sorry.
 

godreborn

Welcome to the Machine
Member
Joined
Oct 10, 2009
Messages
38,470
Trophies
3
XP
29,200
Country
United States
you could check with sdio anyway, slc.bin is 640,672KBs iirc. if it's less than that, you need nandfixer, which I don't think works without the otp.bin. if you don't have it, the system is bricked permanently.
 

godreborn

Welcome to the Machine
Member
Joined
Oct 10, 2009
Messages
38,470
Trophies
3
XP
29,200
Country
United States
yep, just checked. you do need the otp.bin:

1644600530431.png
 
  • Like
Reactions: E1ite007

godreborn

Welcome to the Machine
Member
Joined
Oct 10, 2009
Messages
38,470
Trophies
3
XP
29,200
Country
United States
well, we tried. the good thing is that the gamepad usually takes up the majority of the cost of a wii u console, so just buy one without a gamepad.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • B @ BigArnold:
    Can you guys help with my problem concerning my Switch?
  • K3Nv2 @ K3Nv2:
    Did you switch it up
  • B @ BigArnold:
    Switch what up?
  • K3Nv2 @ K3Nv2:
    Switch the switch to resolve your issue
  • Xdqwerty @ Xdqwerty:
    @BigArnold, sorry but i cant, i dont have a switch. also what k3nv2 says is a joke
  • B @ BigArnold:
    That's what I figured. I put a post up in a forum but no one seems to replying to posts there. I also don't what this chat is attached to.
  • K3Nv2 @ K3Nv2:
    General chat as it implies
  • Xdqwerty @ Xdqwerty:
    @BigArnold, try posting in the "switch noob paradise" thread
  • B @ BigArnold:
    That's where I put it. But like I said other people's posts from a day or two ago have no responses. I'm not sure if the chat is part of the Nintendo forum that I'm on or a part of the website as a whole.
  • Xdqwerty @ Xdqwerty:
    @BigArnold, part of the website as a whole
  • Xdqwerty @ Xdqwerty:
    then try making a thread
  • Xdqwerty @ Xdqwerty:
    wait you are too new to be able to do that
  • B @ BigArnold:
    That's fine. I'll find my way.
    +1
  • BigOnYa @ BigOnYa:
    @BigArnold you put the fusee or hekate.bin in the hekate/ payloads folder, or use app to push the payload to switch while its in rcm mode
    +1
  • B @ BigArnold:
    The problem is is that TegraGUI isn't detecting my Switch despite it being plugged in and in RCM or maintenance mode.
    +1
  • BigOnYa @ BigOnYa:
    Did you click install driver inside the tegra app.
  • B @ BigArnold:
    I did all of that stuff and it seemed successful but still nothing. The only thing different from the guide I used was that my device wasn't showing up as APX but rather Nintendo Switch.
  • B @ BigArnold:
    I did it inside the Tegra app and Zadig.
  • BigOnYa @ BigOnYa:
    Try a different USB c cable, or different USB port on your pc.
  • B @ BigArnold:
    I tried a different port and don't have another cable. I'm fairly certain there's no issue with the equipment I'm using.
  • BigOnYa @ BigOnYa:
    Some cheap USB c cables don't send data, they only charge
  • B @ BigArnold:
    The cable is usually used to connect my controller to my switch's dock.
  • BigOnYa @ BigOnYa:
    Only other thing Id suggest is using a phone/tablet and use the Rekato app, or different pc
  • B @ BigArnold:
    Okay then.
    Thanks for your help.
    +2
    B @ BigArnold: Okay then. Thanks for your help. +2