Thx for your answer jkyoho!follow the pcbscan trace here
Oh, thx whisky9!There is an alternative location of data0 near the shield but you need drill into pcb (5 layers).
View attachment 399473
https://github.com/eliboa/NxNandManager/actions/runs/6496597299, but it can't see system more than 16.0.2, i put 16.0.3 or 16.1.0, but nand manager can't read the versión number, i've upgrade a switch Lite, to 16.0.3, and again, it can't read version number nand manager, but it works fine
I can´t see the release? =( Only v5.2...
Download the Artifact from that link, it's not on master branch but updated to support 17.0.0 version numberI can´t see the release? =( Only v5.2...
Ok!Download the Artifact from that link, it's not on master branch but updated to support 17.0.0 version number
Oh, thx whisky9!
I have made various things to try to revive My oled, change emmc (i have damaged the original), rebuild nand, without luck, it can use hekate, but when i try to boot, stay in nintendo logo, and then, black screen... no second state... hekate can grab info for max, and various ic, so i don't know, what more can i do... i put an emmc from an old celular (new arrives in 2 weeks), i've write boot0/1 with octoplus, and i've Made a nand restore to have correct cal0, and correct read from tegra Explorer with my prod.keys, i've use nand manager, but it can't see system more than 16.0.2, i put 16.0.3 or 16.1.0, but nand manager can't read the versión number, i've upgrade a switch Lite, to 16.0.3, and again, it can't read version number nand manager, but it works fine
Post automatically merged:
I've found this damage, and put a resistor of 10k to the right and a cap of 1uf to the leftI
The cap is 100nF.Oh, thx whisky9!
I have made various things to try to revive My oled, change emmc (i have damaged the original), rebuild nand, without luck, it can use hekate, but when i try to boot, stay in nintendo logo, and then, black screen... no second state... hekate can grab info for max, and various ic, so i don't know, what more can i do... i put an emmc from an old celular (new arrives in 2 weeks), i've write boot0/1 with octoplus, and i've Made a nand restore to have correct cal0, and correct read from tegra Explorer with my prod.keys, i've use nand manager, but it can't see system more than 16.0.2, i put 16.0.3 or 16.1.0, but nand manager can't read the versión number, i've upgrade a switch Lite, to 16.0.3, and again, it can't read version number nand manager, but it works fine
Post automatically merged:
I've found this damage, and put a resistor of 10k to the right and a cap of 1uf to the left
After one month and half, the oled revives!Oh, thx whisky9!
I have made various things to try to revive My oled, change emmc (i have damaged the original), rebuild nand, without luck, it can use hekate, but when i try to boot, stay in nintendo logo, and then, black screen... no second state... hekate can grab info for max, and various ic, so i don't know, what more can i do... i put an emmc from an old celular (new arrives in 2 weeks), i've write boot0/1 with octoplus, and i've Made a nand restore to have correct cal0, and correct read from tegra Explorer with my prod.keys, i've use nand manager, but it can't see system more than 16.0.2, i put 16.0.3 or 16.1.0, but nand manager can't read the versión number, i've upgrade a switch Lite, to 16.0.3, and again, it can't read version number nand manager, but it works fine
Post automatically merged:
I've found this damage, and put a resistor of 10k to the right and a cap of 1uf to the left