Spoiler: Uninstalling Infinity 1.0

Downloads Links

• Chronoswitch 7.0

Uninstalling Infinity

1. Download, Extract, Copy: folders, 'OFW' and 'Chronoswitch', to PSP storage.
2. Boot: Chronoswitch (CHRONOSWITCH folder). X to proceed. X to continue. X to start updater.
3. Start OFW update (UPDATE folder).

Troubleshooting

"A later version of the system software is already installed. There is no need to update."

1. Copy version.txt into SEPLUGINS/ folder.
2. Go to recovery menu. Enable Configuration. Enable version.txt
3. Copy 6.61 OFW update into PSP storage (PSP/GAME/UPDATE/EBOOT.PBP).
4. In PSP, install the OFW 6.61 update (not via Chronoswitch).

Spoiler: Unbrick PSP

Baryon Sweeper

Before Installation

• 1000, 2000 (TA-088v2 and older) PSPs: use cIPL instead of Infinity (CIPL_Flasher folder).
• https://www.psdevwiki.com/psp/Motherboards#Hackability
• identify the motherboard: PSPident v0.75
• (L)CFW must be reapplied every time the PSP is turned off/restarted (FastRecovery folder).

Downloads Links

• PSP Go Infinity (v2.0.3)
  • PSP Go OFW 6.61 Update
• PSP 2000, 3000, Street Infinity (v2.0.3)
  • PSP 2000, 3000, Street OFW 6.61 Update
• PSP PRO (L)CFW for 2000, 3000, Street, & Go [2015-02-14_YotiMod-2015-03-33-F]

Installing Infinity

1. Update to 6.61. Remove any UMD from the disc drive. Deactivate or remove any plugins (.PRX).
2. Download, Extract, Copy: folders, 'Infinity' and 'CFW', to PSP storage.
3. Boot: Infinity 2 (UPDATE folder). X to install Infinity. X to reboot.
4. Boot: CFW installer (PROUPDATE folder). X to install.
5. Boot: Infinity 2. Press left. X to choose respective (*)CFW. PS button. X to exit.

Optional: 6.60 plugins on 6.61

 

[zfreeman]

Ah, that's right. it might not be compatible with older firmware versions. It's been a while. You should bring it back from 5.00 CFW to 5.00 OFW before updating. http://downloads.pspspot.net/firmware/762-5-00-official-psp-firmware.html. After, updating to any 6.XX firmware should do the trick. You can update with the 6.61.PBP from here, just rename it 'EBOOT.PBP'.

 

[Pockie]

Ah, that's right. it might not be compatible with older firmware versions. It's been a while. You should bring it back from 5.00 CFW to 5.00 OFW before updating. http://downloads.pspspot.net/firmware/762-5-00-official-psp-firmware.html. After, updating to any 6.XX firmware should do the trick. You can update with the 6.61.PBP from here, just rename it 'EBOOT.PBP'.

Oh, I updated it to 6.61 without bringing it to 5.00 OFW. Now running 6.61 PROMOD-C2p

 

[zfreeman]

There's always a slight chance the older CFW changed some things not compatible with OFW, so there's a greater chance of bricking. At least that's what the old forum posts say. Even then, it's a soft-brick and can be recovered, though it's a pain.

 

[Pockie]

There's always a slight chance the older CFW changed some things not compatible with OFW, so there's a greater chance of bricking. At least that's what the old forum posts say. Even then, it's a soft-brick and can be recovered, though it's a pain.

So then, should I go back and do that or leave it as is?

On another note, my old iso tool and Ultimate Vhs Menu does not seem to be working, know where I can get new ones?

 

[zfreeman]

The update and CFW installation was successful, so there's no need. I assume Wololo has the latest, but I'll have to look around.

Iso Tool: http://wololo.net/talk/viewtopic.php?f=2&t=9644

It looks like they didn't update Ultimate VSH Menu to be compatible with later firmwares. PRO's VSH menu is pretty serviceable. I think the additional settings that aren't there, are in the recovery menu.

 

[Pockie]

Alright have a 3000 and I got everything until the final step. When I try to open configuration it says its corrupt and it cant open it. Same for other things too like iso tool.

 

[zfreeman]

Run the Fast Recovery to enable CFW?

 

[Pockie]

it starts it and then turns off. nothing happens.
The only two that start is fast recovery and the cfw should I try re-installing it?


Update: Alright after it froze and rebooted I went back to the vcfw and I can now open the configuration and on the left is two options Pro and ME and on the right is says to update but when I click it says files cant be found

 

[zfreeman]

Davee discontinued the updates because 1.03 caused bricks, so Update does not work. Just select the CFW you installed and exit out of the application. That's it.

 

[Pockie]

Got it, thanks once again.

 

[jumpman1229]

I have a PSP Go on 6.39, will this work for me?

 

[zfreeman]

It will. I recommend updating to 6.61 beforehand.

 

[jumpman1229]

It will. I recommend updating to 6.61 beforehand.

Thank you! I just finished the process and it was quite easy

 

[Kurama85]

It will. I recommend updating to 6.61 beforehand.

So I am pretty much a total noob when it comes to this, but I have a series 3000 6.37-can I use the 6.61 method that you have posted in this thread?

 

[zfreeman]

With your 3000, if you want a permanent Custom FirmWare, your only option is this Infinity tutorial. That involves updating to 6.61.

 

[ctgchaos]

Does this make a permanent mod for PSP 3000 possible or not? I've been out of it all for a few years now and my PSP 2000 seems to be unresponsive after years, so I might need to get a new device...

 

[naddel81]

Maybe try a new battery first?


Gesendet von iPhone mit Tapatalk

 

[SaberLilly]

I did this on a 1000 series. It all went fine but the VSH menu seems to be non-persistant

Fixed it, ignore this (EDIT)

 

[naddel81]

What advantage do I have when I upgrade from my 6.xx infinity custom firmware?


Gesendet von iPhone mit Tapatalk

 

[godreborn]

What advantage do I have when I upgrade from my 6.xx infinity custom firmware?


Gesendet von iPhone mit Tapatalk

afaik, none. you can spoof the firmware with a text file named I think version.txt in the seplugins directory. it should look like this:

release:6.61:
build:4047,0,3,1,0:builder@vsh-build6
system:55383@release_661,0x06070010:
vsh:p6544@release_661,v56454@release_661,20091118:
target:1:WorldWide

it will fail at psp downloads though, but you can pretend to be on the latest firmware. it's not worth upgrading past 6.60 though as a lot of plugins don't work, and its fixes are minimal. I think it only fixes bugs in like 2 games, plus ap fixes.