yeah, nothing you can do in this case except replace the chip
I received and installed the black Instinct NX chip and the switch is working great!
yeah, nothing you can do in this case except replace the chip
Looking for a link as well. Any significant differences between HWFly and Instinct NX and Picofly methods for just a regular user who wants to do Homebrew offline? Thanks ahead of time.Anyone have a link to a seller that will ship to the US if you message them? Thanks in advance.
Posts in this thread have been quite helpful in making a decision. Seems like I'm going to make a decision on an Instinct NX V6 (OLED) Chip and I wanted to get a DM or message on what Aliexpress Chips sellers to contact for purchase.Aliexpress chips sellers hides their products. If you want to by - write them message.
Unsure but now there are a lot of rp2040 based ones:Anyone have a link to a seller that will ship to the US if you message them? Thanks in advance.
wow so cheap now!Unsure but now there are a lot of rp2040 based ones:
US $18.16 11%OFF | For switch Core V4 v5 Upgradable Flashable Support V1 & V2 Erista and Mariko for switch lite v4 for switch oled v4 chip https://a.aliexpress.com/_EuBqZln
Which model should I buy for a Oled Switch? Would it be the "oled" or "rp2040 oled" in the various selections from your shared link.Unsure but now there are a lot of rp2040 based ones:
US $18.16 11%OFF | For switch Core V4 v5 Upgradable Flashable Support V1 & V2 Erista and Mariko for switch lite v4 for switch oled v4 chip https://a.aliexpress.com/_EuBqZln
I had exactly the same problem as seen in your video. I redid all the solder points with wire instead of the flex. No fix. What do you think fixed yours?Incase any one’s wondering, I redid my cpu cable and switched back to the flex and it worked for some reason (all points still measured the same). But I did break the display connector
I honestly don't know I just kept desoldering and resoldering all the points. Maybe try a different thicker wire for dat0. Because according to sthetix's video when it blinks purple red the issue is point c.I had exactly the same problem as seen in your video. I redid all the solder points with wire instead of the flex. No fix. What do you think fixed yours?
I honestly don't know I just kept desoldering and resoldering all the points. Maybe try a different thicker wire for dat0. Because according to sthetix's video when it blinks purple red the issue is point c.
Where can instint-nx be purchased? I am only seeing the RP 2040 HWFLY.
Which is the better choice of the two?
I am planning on modding an OLED. Which should I get?If you don't got an OLED don't get Instinct-NX.
yes it worksBTW did anyone tested and succeded using new black-version of instinct-nx with oled?