have a base 3.0.1 system, when to 5.1 with choidujourNX, was fine, then updated to NX-6.0.1-1.0 (still with cdjNX), replaced all the files on the sd with rajnx 0751 files and I'm still getting a 2011-0301 error too.
OFW boots fine.
I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?
can anyone help ? thanks
OFW boots fine.
I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?
can anyone help ? thanks
You need to delete and replace the files in your SD card, and also make sure you are sending the new payload, not the old one. It will work after doing this.have a base 3.0.1 system, when to 5.1 with choidujourNX, was fine, then updated to NX-6.0.1-1.0 (still with cdjNX), replaced all the files on the sd with rajnx 0751 files and I'm still getting a 2011-0301 error too.
OFW boots fine.
I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?
can anyone help ? thanks
Sent from my BND-L24 using Tapatalk
doing that alreadyhave a base 3.0.1 system, when to 5.1 with choidujourNX, was fine, then updated to NX-6.0.1-1.0 (still with cdjNX), replaced all the files on the sd with rajnx 0751 files and I'm still getting a 2011-0301 error too.
OFW boots fine.
I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?
can anyone help ? thanks
using the newest ipl too
Raj released a lot of VERY useful tools for the switch, I'd still be stuck on 3.0.1 with no exfat ans SX OS if it weren't for him. Rei used atmo sources to load SX OS cracked (not by him) nsp installer function, wow, I'm in "awe".
reflashed my nand backup (for nothing) and still had the "same" issue with cfw (stuck at the switch logo this time, no errors) (stock booting fine)have a base 3.0.1 system, when to 5.1 with choidujourNX, was fine, then updated to NX-6.0.1-1.0 (still with cdjNX), replaced all the files on the sd with rajnx 0751 files and I'm still getting a 2011-0301 error too.
OFW boots fine.
I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?
can anyone help ? thanks
tried another sd card lying around, and it worked fine this time, so yeah, don't forget to backup your saves every once in a while, and format/change your sd card if you have such an issue.
the lull is a chance for everyone to swap to official atmosphere to give it its deserved place in the spotlight, make use of it (bigger things are in the works for this, dont want to release tiny updates being in lockstep with atmosphere all the time)
If there were available (friendly) documentation for the atmosphere, I would agree with you. Currently RajNX indispensable for many users.
I have some installed NSPs on my NAND. Is there something out there that can boot the games directly from the main menu without that download game update BS?
Shameless promotion: https://guide.sdsetup.com
The sdfiles are basically (almost) vanilla atmosphere+fancy goodies.
I'm sorry, that's not exactly what I meant.Shameless promotion: https://guide.sdsetup.com
The sdfiles are basically (almost) vanilla atmosphere+fancy goodies.
Last edited by Skonikol,
@rajkosto help me, I've used the R4S and downloaded current.uf2 (rajnx) and flash to R4S but it 0.7.4. I've updated firmware to 6.1.0 and use rajnx 0.7.5.1a. (the website R4S not link download for rajnx, and not assist good for all cfw sx os, hekate, rejnx, atmosphere... in 6.1.0, the link download is 25.9.2018. Would you could make a current.uf2 0.7.5.1a for R4S. R4S possible not compatible with rajnx, when I put it in it led red and blue and not boot to payload rajnx (It already RCM), but when I plugin PC with usb type C, tergarcmgui say rcm, but I don't send payload, un plug from pc and plug R4S in Nintendo SW, then It can boot in payload but not boot to cfw because it not compatible with 6.1.0, when I use RCM loader (same R4S or SX Gear) RCM loader boot normal. Can you help me R4S not boot to payload (It can boot if I plug NX in pc with usb type C and not send payload, then unplug and plug R4S, then it boot to payload), I dont understand
the 0.7.4 rajnx can not use with firm 6.x.x, could you make the current.uf2 file for R4S for everybody use rajnx with R4S? thanks you very much
the 0.7.4 rajnx can not use with firm 6.x.x, could you make the current.uf2 file for R4S for everybody use rajnx with R4S? thanks you very much
Last edited by beeno92,
- Joined
- Jul 20, 2016
- Messages
- 183
- Trophies
- 0
- Location
- - Planet Earth -
- Website
- www.facebook.com
- XP
- 1,364
- Country
I really like RajNX simple the best & user friendly solution. I tested both on 6.1 firmwares & worked great. Thank you very much.
But i have a question about overclock Switch?
Could you add a new feature to increase CPU or GPU for better experience of Handheld mode?Sr for my bad english
But i have a question about overclock Switch?
Could you add a new feature to increase CPU or GPU for better experience of Handheld mode?Sr for my bad english
- Joined
- Jul 20, 2016
- Messages
- 183
- Trophies
- 0
- Location
- - Planet Earth -
- Website
- www.facebook.com
- XP
- 1,364
- Country
I was able to use title manager (tinfoil) from RajNXv069.zip file on 2.3, 3.02 & 5.1 firmwares but this tinfoil is not working on 1.0.
Also, I tried goldleaf-a14ea6a on 1.0 but it stopped working with an error.
Anybody has experience about working title manager on firmware 1.0? Thank you.
Also, I tried goldleaf-a14ea6a on 1.0 but it stopped working with an error.
Anybody has experience about working title manager on firmware 1.0? Thank you.
you can't use nap installers on 1.0.0 as it lacks the services required to support the install. the minimum fw that allows nsp installs is 2.0.0 iirc
Similar threads
-
- Portal
-
- Article
- No one is chatting at the moment.
-
@
Jayro:
Eventhough the New 3DS XL is more powerful, I still feel like the DS Lite was a more polished system. It's a real shame that it never got an XL variant keeping the GBA slot. You'd have to go on AliExpress and buy an ML shell to give a DS phat the unofficial "DS Lite" treatment, and that's the best we'll ever get I'm afraid.+1 -
-
@
SylverReZ:
@Jayro, I don't see whats so special about the DS ML, its just a DS lite in a phat shell. At least the phat model had louder speakers, whereas the lite has a much better screen.+1 -
@
SylverReZ:
They probably said "Hey, why not we combine the two together and make a 'new' DS to sell".
-
-
-
@
Veho:
Nothing special about it other than it's more comfortable than the Lite+1
for people with beefy hands. -
-
-
-
-
-
-
@
The Real Jdbye:
@SylverReZ if you could find a v5 DS ML you would have the best of both worlds since the v5 units had the same backlight brightness levels as the DS Lite unlockable with flashme -
-
-
@
BigOnYa:
A woman with no arms and no legs was sitting on a beach. A man comes along and the woman says, "I've never been hugged before." So the man feels bad and hugs her. She says "Well i've also never been kissed before." So he gives her a kiss on the cheek. She says "Well I've also never been fucked before." So the man picks her up, and throws her in the ocean and says "Now you're fucked."+1 -
-
-
@
BakerMan:
anyways, we need to re-normalize physical media+1
if i didn't want my games to be permanent, then i'd rent them -
@
BigOnYa:
Agreed, that why I try to buy all my games on disc, Xbox anyways. Switch games (which I pirate tbh) don't matter much, I stay offline 24/7 anyways.
-
-
@
cearp:
@BakerMan - you can still "own" digital media, arguably easier and better than physical since you can make copies and backups, as much as you like.
The issue is DRM -
@
cearp:
You can buy drm free games / music / ebooks, and if you keep backups of your data (like documents and family photos etc), then you shouldn't lose the game. but with a disk, your toddler could put it in the toaster and there goes your $60
-
