That you don't have the needed masterkey, you're catching the second error. The first one says that a masterkey is missing, then it doesn't generate the header in memory, so at the point it measures it's size it says the header doesn't have length.Processing: C:\x64\sample.nsp
Exception: object of type 'NoneType' has no len()
what does this mean when converting an nsp to xci?
That you don't have the needed masterkey, you're catching the second error. The first one says that a masterkey is missing, then it doesn't generate the header in memory, so at the point it measures it's size it says the header doesn't have length.
Anyway, you're missing the needed masterkey, probably master_key_07 or master_key_08. There is a keyss.txt verifier in "Mode 0: Options"
master_key_06 is Missing
master_key_07 is Missing
guess I'm kinda in a jam then, my emunand is 8.0.1 and my orginal nand is 5.1
when I dumped the keys with lockpick_rcm it only dumped keys to 5.1 correct?
You didn't properly followed the instructions. The latest version of lockpick_rmc can dump all the keys. You'll need a part of Atmosphère.master_key_06 is Missing
master_key_07 is Missing
guess I'm kinda in a jam then, my emunand is 8.0.1 and my orginal nand is 5.1
when I dumped the keys with lockpick_rcm it only dumped keys to 5.1 correct?
I think my problem was my sysnand is 5.1 and emunand is 8.0.1. so lockpick_rcm is going after the sysnand.You didn't properly followed the instructions. The latest version of lockpick_rmc can dump all the keys. You'll need a part of Atmosphère.
Yes, it can change the masterkey a game need and the RSV setting, that normally works but if a game has dependencies from the higher firmware it'll error out, it's trial and error.Can this tool be used to 'rebuild' an XCI just to patch the firmware requirement? Play games that require 8.0 on 7.0.1 Switch?
Yes, it can change the masterkey a game need and the RSV setting, that normally works but if a game has dependencies from the higher firmware it'll error out, it's trial and error.
When it asks if you want to patch the rsv when processing the file say "yes" and then the keygeneration you want.What options should be selected?
When it asks if you want to patch the rsv when processing the file say "yes" and then the keygeneration you want.
I put a note like a week ago about Rocket League, both in the first post and in one of the messages:Alright one little issue I have run into, Mortal Kombat 11 and Rocket League won't turn into XCI, they go from NSP and out put NSP again, any ideas?
Dunno about Mortal Kombat. Did you try to verify the files? For rocket league if it's the one i'm thinking about it will error out since one of the nca headers is completely messed up, had to implement a raw_extraction without checks and check each nca by itself to find the bad one which was the control I think.NOTE: There is a bad update for v1376256 Rocket League, has a bad control nca and I had to do modifications in NSCB to be able to extract the nca files and check the update. The error is at the header level in that nca which impedes the asignation of that file as nca and raises an exception.
If you encounter this issue is related to this. The update is encrypted with keygeneration3\master_key_02. An improvement in the verification will be implemented for these cases.
I've never saw that error myself. The way you described it before it seemed to happen when the Coulter pops up so it shouldn't be relevant. I imagine you'd get rid of it if you delete the call to the counter.@JRoad any update on this error?