Picofly Tiny mod to switch Oled, with "Facelift" (copper pad) DATO point, using the Kamikaze method!.
The tool used for drilling is MaAnt D1
I put the mosfet on the back of the motherboard.
I also used a copper pad for the DATO point.
I also put the SDA and SCL wires for a more stable glitch.
Everything went well without any particular problems.
You just need to be careful and be sure of your hand.
The tool used for drilling is MaAnt D1
I put the mosfet on the back of the motherboard.
I also used a copper pad for the DATO point.
I also put the SDA and SCL wires for a more stable glitch.
Everything went well without any particular problems.
You just need to be careful and be sure of your hand.
Attachments
-
0.JPG1.5 MB · Views: 18
-
11.JPG1 MB · Views: 19
-
10.PNG5 MB · Views: 43
-
9.PNG5 MB · Views: 29
-
8.PNG5 MB · Views: 48
-
7.PNG2 MB · Views: 38
-
6.PNG1.7 MB · Views: 39
-
5.PNG1.8 MB · Views: 45
-
4.PNG2.2 MB · Views: 30
-
3.PNG1.8 MB · Views: 34
-
2.PNG1.9 MB · Views: 26
-
1.PNG1.6 MB · Views: 43
-
7.JPG1.4 MB · Views: 35
-
12.mp413.6 MB