Hi all, I've had a HWFLY chip installed on my OLED using a local installer. Worked fine for a few months, then the chip started flashing white. Took it back to installer to fix, apparently faulty HWFLY chip, he installed a new one. After a few more months of working fine, I arrive with another error, flashing white again. I removed it from my case, and it would glitch correctly and boot into hekate. I figured the case was too tight and squeezing the internals or something?
Anyways, case is out of the equation. HWFLY chip is glitching correctly each time, but would be faced with the following errors depending on what I boot into:
1. SYSCFW and OFW would crash within 10 minutes with error code: 2002-3535
I did some research, Apparently EMMC damaged?
2. EMUNAND works for about 1-2 hours and then it would freeze. I haven't timed it so not sure when exactly it would freeze but it seems to be consistent, I call this the "freeze timer". If the console was asleep during the "freeze timer", then I won't be able to wake it up, just black screen. Hard reset via power button would reboot it back into hekate. If I was using the console during the "freeze timer", the screen would stay lit and whatever was on the screen remains the same, except its frozen. I can hold power and home buttons to pull up the respective menus, and I can scroll up and down in the menu, but eventually have to reboot as nothing can be done.
I have did lots of testing, formatting SD card, changing SD cards, redoing the Emunand but still face the above issues.
Been stressed for months, decided to finally reach out to the community. Thanks so much
Anyways, case is out of the equation. HWFLY chip is glitching correctly each time, but would be faced with the following errors depending on what I boot into:
1. SYSCFW and OFW would crash within 10 minutes with error code: 2002-3535
I did some research, Apparently EMMC damaged?
2. EMUNAND works for about 1-2 hours and then it would freeze. I haven't timed it so not sure when exactly it would freeze but it seems to be consistent, I call this the "freeze timer". If the console was asleep during the "freeze timer", then I won't be able to wake it up, just black screen. Hard reset via power button would reboot it back into hekate. If I was using the console during the "freeze timer", the screen would stay lit and whatever was on the screen remains the same, except its frozen. I can hold power and home buttons to pull up the respective menus, and I can scroll up and down in the menu, but eventually have to reboot as nothing can be done.
I have did lots of testing, formatting SD card, changing SD cards, redoing the Emunand but still face the above issues.
Been stressed for months, decided to finally reach out to the community. Thanks so much