Hacking Question RcM and payload injection while the switch is in a batterycase

[Bernhard]

Hello there! i want my switch to be in a battery case (for max battery and because i dont want that the usb c wears out over time) ..
i plug in any payloadinjectmethod but it does not recognize my switch!
i tried it on my battery case,but it didnt work :/
so here s the question,do you guys own a batterycase that is capable?

 

[ichibaka]

The battery case usb port is for charging only, not data pass-through

 

[TheCyberQuake]

You need to take the case off for payload injection

 

[Bernhard]

yeah this sucks actually....
any idea how we could make a passthrough?
i mean it would prevent the switch from wearing out ... this is my only reason i want to do this

 

[ScarletDreamz]

yeah this sucks actually....
any idea how we could make a passthrough?
i mean it would prevent the switch from wearing out ... this is my only reason i want to do this

Wearing out?

 

[Bernhard]

Wearing out?

that the usb c port does not work after a period of time
because if you plug in stuff like the sx pro dongle or a charging cable often
the port wears out

 

[ichibaka]

nothing you can do, the case's usb port was never wired for data

 

[Insane]

According to http://www.usb.org/developers/docs/..._3_0_Compliance_Document_v1.02_2011-10-04.pdf page 6, section durability, the micro connector family must withstand a minimum 10000 cycles before breaking. That means if you plug/unplug it 5 times a day, every day it needs to last at least 5 years, 6 months.

How often do you unplug that thing?

 

[Bernhard]

nothing you can do, the case's usb port was never wired for data

Is there any case that could handle this?
i mean i ve seen some cases with micro hdmi... so it would be possible to tinckle a little bit
am i right?^^

--------------------- MERGED ---------------------------

nothing you can do, the case's usb port was never wired for data

Is there any case that could handle this?
i mean i ve seen some cases with micro hdmi... so it would be possible totinckle a little bit

According to http://www.usb.org/developers/docs/..._3_0_Compliance_Document_v1.02_2011-10-04.pdf page 6, section durability, the micro connector family must withstand a minimum 10000 cycles before breaking. That means if you plug/unplug it 5 times a day, every day it needs to last at least 5 years, 6 months.

How often do you unplug that thing?

it depends
but i ve seen it on my phone too... so yeah
i know it s a little bit akward but i really hope that there s a chance for a batterycase which can handle such things

 

[lufeig]

install a modchip or trinket m0 inside the console and you're done

 

[Bernhard]

install a modchip or trinket m0 inside the console and you're done

which modchip are u talkin bout?

 

[lufeig]

which modchip are u talkin bout?

https://gbatemp.net/threads/gemma-m0-trinket-m0-uf2-files-guide-battery-discharge-fix.508068/unread

https://gbatemp.net/threads/a-tiny-soldering-job-reversable-trinket-m0.510163/unread

https://gbatemp.net/threads/team-rebug-starts-pre-orders-for-their-switchme-internal-modchip.512320/