Homebrew safefirmraunchhax - new Arm9 exploit discussion

[_Pro_Man_]

just finished 2nd attempt, same glitch screen

What are the steps that you are going through that ends up with this glitched screen?

 

[shchmue]

What are the steps that you are going through that ends up with this glitched screen?

3DS sound -> soundhax -> hbl 2.8 loads
run safehax (built myself from the latest commit with ctrulib up to date)
waithax runs since i'm on 11.0
the second it finishes i see the attached

 

[Natboy]

How far did it go until it glitched out?

 

[ven0m23]

with mine i think its stuck at patching arm11

 

[AHP_person]

3DS sound -> soundhax -> hbl 2.8 loads
run safehax (built myself from the latest commit with ctrulib up to date)
waithax runs since i'm on 11.0
the second it finishes i see the attached

https://github.com/TiniVi/safehax/blob/master/source/main.c#L160 This is what your seeing. It seems like you get a hang after application exit, since getting to that point generally means everything ran fine.

 

[shchmue]

with mine i think its stuck at patching arm11

yeah a few people are reporting hangs there on reddit: https://www.reddit.com/r/3dshacks/c...firmlaunchhax_is_already_implemented/dbx5kgl/

https://github.com/TiniVi/safehax/blob/master/source/main.c#L160 This is what your seeing. It seems like you get a hang after application exit, since getting to that point generally means everything ran fine.

yeah... but when i press start or whatever else nothing changes

 

[ven0m23]

3DS sound -> soundhax -> hbl 2.8 loads
run safehax (built myself from the latest commit with ctrulib up to date)
waithax runs since i'm on 11.0
the second it finishes i see the attached

mind posting your complied version ?

 

[_Pro_Man_]

yeah a few people are reporting hangs there on reddit: https://www.reddit.com/r/3dshacks/c...firmlaunchhax_is_already_implemented/dbx5kgl/


yeah... but when i press start or whatever else nothing changes

Try with this one?
https://github.com/Plailect/safehax/releases

 

[shchmue]

mind posting your complied version ?

i guess, looks like that plailect one proman posted should be the same, so i'll get that and here's mine

 

[Svaethier]

I'd love to test this since I have a9lh but not sure what patches to disable on corbenik cfw @.@

 

[AHP_person]

yeah... but when i press start or whatever else nothing changes

That's because it's either hanging on firm reboot, or under safemode firm.

with mine i think its stuck at patching arm11

That's interesting. I would assume payload memcpy is crashing somewhere, which IS an issue I ran into, but only with huge payloads... I'll try to look into that.

 

[shchmue]

N3DS speed again, this time on Plailect's build. must be my birthday. 20m40s to go.

 

[Nostalgianinja]

Getting the same glitching effect. 11.0.0-33 EU device. just after the hax completes its handle counter it tries initiating HAX and then glitches up the left hand side of the screen.

 

[jeffro]

Same issue

I first used Steelhax (which was 2.7 hax), now I'm trying out with Soundhax (2.8 hax).

I got this from going > Steelhax > Safehax > glitch screen after the long wait.
I got a N3DSXL on 11.0.0-33E.

 

[AHP_person]

Ok, so what I've gathered is that running with waithax isn't working for anyone. Can anyone test under 11.0?

 

[dkabot]

I should note the IRC report of it working was on an O3DS.
Anyone else testing with one (I know ven0m was)?

 

[Kyubnyan]

Ok, so what I've gathered is that running with waithax isn't working for anyone. Can anyone test under 11.0?

hm, it probably isn't worth changing for waithax since fasthax comes out tomorrow.

 

[imRed]

Stuck at patching arm 11, o3ds with 2.8hax otherapp payload with firm 11.0.0.33. Europe.

 

[MsMidnight]

I'd love to test this since I have a9lh but not sure what patches to disable on corbenik cfw @.@

Then why get corbenik ? It's for the more advanced user and if you don't know what to enable or disable, you should switch to Luma for the sake of being noob friendly and simplicity

 

[Aletron9000]

Mine froze at "Patching ARM11"