Hi! I've had a modded switch with Atmosphere for over a year. I've always used it in emuMMC and I always updated it correctly. I never had problems. I never even turned it off completely so as not to have to inject the payload, except for the 2/3 times I updated Atmosphere and firmware. Yesterday I turned it off completely to remove the micro SD and update Atmosphere, but it never turned back on. Once I turned off the Switch and prepared the SD, I tried to send it to RCM with Vol + and PWR but I forgot to insert the jig. Obv nothing happened, so I inserted the jig and tried again but nothing happened again. PC doesn't detect any RCM and the Switch doesn't even turn on normally anymore. Apparently dead. I tried charging it all night, holding PWR, sending it into reset mode with Vol -, Vol + and PWR, I even tried opening it, unplugging the battery and plugging it again, but nothing. It gave me the same problem another time but after a few hours of charging everything was fine again. This time it shows no signs of life and it doesn't even go into RCM because the PC doesn't detect anything. If I insert it into the dock, the green LED on the dock turns on for a second and then turns off. How can I do?