Good lookin out, Money!It's down at the moment. It'll come back, just need to be patient.
View attachment 358193
Good lookin out, Money!It's down at the moment. It'll come back, just need to be patient.
View attachment 358193
Delete the old /atmosphere folder and download the new one then place it on your SD card.hello on 14.1.2ams 1.3.2/E, how to update my nintendo switch to atmosphere CFW latest ang safest version, I want to update it so I can play new games,I saw something in youtube but I don't trust it,I don't want to happen again the very last time I update my nintendo switch what's is the safest and easiest way to updated it.
I hope someon can help me thank you so much
where can I download latest and safe version because I tried to download before in youtube but It cause me a problemDelete the old /atmosphere folder and download the new one then place it on your SD card.
There is only one place you should download Atmosphere from and that is the official GitHub page. It is a good thing you are avoiding YouTube videos because they are highly notorious for causing more problems.where can I download latest and safe version because I tried to download before in youtube but It cause me a problem
Yes ive learn my lesson hard way hehe. Im hope this time I wont make a mistakeThere is only one place you should download Atmosphere from and that is the official GitHub page. It is a good thing you are avoiding YouTube videos because they are highly notorious for causing more problems.
There is only one place you should download Atmosphere from and that is the official GitHub page. It is a good thing you are avoiding YouTube videos because they are highly notorious for causing more problem
is this is the only files I need to download for updating my nintendo switch?If not, Want are the other files I should download alsoThere is only one place you should download Atmosphere from and that is the official GitHub page. It is a good thing you are avoiding YouTube videos because they are highly notorious for causing more problems.
Exactly! But is not the other way around, right? A secondary account that made the purchase cant give the access of DLC to the primary, right? I was thinking if theres something like that for modded consoles.For non modded secondary account can access primary account purchase as long the account that made the purchase is set to primary console.
Exactly! But is not the other way around, right? A secondary account that made the purchase cant give the access of DLC to the primary, right? I was thinking if theres something like that for modded consoles.
inject Hekate and you can backup you Boot0 Boot2 and Rawnand.bin (Sysnand). CFW is not written to the Switch. It’s only exists on yiur SDCard. Remove the SDCard and all traces of CFW are removed.None of the hacking guides seem to mention how to do this, all of them talk about how to fully hack the Switch to install CFW or loaders/homebrew, which I don't want to do. I just want to dump a backup of all my my Switch's internal keys, contents, etc without modifying it in any way.
A jig, at the end of the day, grounds pin 10. That’s it. As long as it doesn’t tear up your joycon rail or connectors, it’s a good jig. The cheap 3d printed rectangles on Amazon/eBay are fine.Thankfully I have a lunch-era Switch which is susceptible to Fusee, even if it's on the latest firmware (from my understanding no firmware can patch this and even on the latest it will work, right?). First of all, is there any difference in which jig I get? I see a few different designs on eBay/Aliexpress. Is there a specific one to try to go for? I heard some claims that there were some shoddy jigs that shorted out the Switch, but I have no idea if that is true.
Hmmmm. New one on me.And then, what would I have to do if I just want to dump all of my Switch's contents while trying to leave no trace of any modifications? I heard that just simply booting into the recovery mode that the jig lets you access apparently sets some kind of flag?
If you install a copy of your Sysnand (aka make an Emunand) then all installs and logs and we’ll, everything, will remain on the SDCard. That’s actually how most people use the guides…Sysnand is always 100% clean.Is there any way to re--set that flag? Are there any other known traces it leaves behind that you can't cover?
100% clean Sysnand is flawless.I know there is no way to 100% know every secret Nintendo put on the Switch to detect hacks and there is no 100% way to guarantee you can't get banned, but if I can reduce my chances to 99.99% and use methods that so far nobody has gotten banned for I would like to go that route.
Inject Hekate and you’re done.So what would be the best way to use a jig/fusee exploit purely for the sake of dumping all of my internal keys and backup all of my contents without touching or modifying anything?
This should get you where you want to be:Are there any guides or videos to do specifically this and not hack it all the way or modify anything? Or if not, can anyone explain how to do something like this? Do I also have to do anything to set it back to stock/reset that flag after I am done dumping the backup with the fusee/jig method? Also, I assume this backup will be encrypted right? Are there any tools on PC that can decrypt it if I also dump my keys or do I have to use the Switch to dump an unencrypted version? Since I would also like to load up my save files into Yuzu/Ryujinx, I am assuming I can't just load my NAND backup into the emulator like you can with Dolphin, but if the backup is decrypted I can at least manually pull the save files out of it and put them in the emulator.
Atmosphere is still in pre-release but most things have been wrung out at this point.I posted a couple of weeks ago asking about having to update my console as Splatoon online play was requiring it. The consensus at the time was to hold off to ensure stability. Now, an old game (Super Mario Maker 2) isn’t allowing me to go online, bringing up the error attached below.
I’m still on version 15 on stock and use atmosphere to run CFW and play backup games from my SD card. I know that the pre-release of atmosphere which supports the new software has been released; would you recommend updating at this point so I can get back online on stock or holding off longer for the full release to avoid any issues?
Sounds like you might be exposed to Ninty servers while in CFW…not ideal.Guys i dont know if i should ask it here. I am running
current version: 16.0.0|AMS 15.0|E
I notice that when i boot into the fuse i can reach atmosphere. Now this is where it gets weird. When i connect my switch to wifi, my games started to download updates automatically. also i realised tesla overlay menu not working anymore.
Attached is my sd root, am i doing anything wrong?
No difference. You can always use Hekate to backup/restore. Having keys in a safe place (along w/ your Sysnand backup) is always a good idea!EXTREMELY helpful, Thank You. I do have a few additional questions though.
https://rentry.org/Getting_Started
In getting started it shows how to dump your keys before you dump your NAND. Is there any reason to dump the NAND first? Does it make any difference?
injector is a device. You can use an Android phone, a dedicated injector or even your PC. It’s just something that can send a payload via USB. Here is a list. Click them all and see what kind you might already have on hand or want to buy:https://rentry.org/SwitchPayloadLaunch
In the "How to Launch a Payload" page it lists several injectors but doesn't really give much details about them, which one would I need to use? Seems like I need to use them to launch the Hekate payload to dump my NAND and the Lockpick_RCM payload to dump my keys.
Yes, but subtract Injector…that’s something you will need shortly…it doesn’t go in your SDCard.So if I understood that guide right, I put theinjector, Hekate, and Lockpick_RCM on a MicroSD card, plug the card and jig into my Switch, then hold Power and Volume Down.
NOW you need the injector…plug it in to your Switch USB port And flick the lever, mash the button or click the icon…whatever you need to push a payload over USB. Do it now.But this will apparently just give me a black screen? Not clear where to go from there.
Encrypted. This is where those keys will come in handy…tools such as hacdiskmount or NXNandManager require the keys. I cant mention NXNandManager without mentioning Emutool….it doesn’t require keys but it extremely useful.The Nand/Key backup instructions just say to "Boot into Hekate" or "Boot into Lockpick_RCM" but I don't know how after going into the RCM that will apparently give me a black screen.
Also so will this just dump an encrypted copy of my nand or an unencrypted copy? Is there any way to either decrypt and view the contents on a PC or load contents of the NAND into an emulator? (Specifically just the save files)
Don't just copy the files. You have to delete the old /atmosphere folder first otherwise you may have problems.Im still nervous about updating my nintendo switch from 14.1.2ams 1.3.2/E to latest version. hoping for the best,I'try to just copy first all inside my sd card before trying to update it haha
noted sir,i'll delete the ola/atmosphere folder then only those two files put on my sd card right?Don't just copy the files. You have to delete the old /atmosphere folder first otherwise you may have problems.
No, you don't put fusee.bin on your SD card. Its a payload used to launch Atmosphere. You only download that if you already use fusee.bin to launch Atmosphere.noted sir,i'll delete the ola/atmosphere folder then only those two files put on my sd card right?
wish me luck thank youNo, you don't put fusee.bin on your SD card. Its a payload used to launch Atmosphere. You only download that if you already use fusee.bin to launch Atmosphere.