You can update to firmware 17.X. It wasn't recommended when the firmware was new but its been around long enough that the important utilities have been updated to support the latest firmware.
Also please don't multi-post or make a thread right after you post in another thread. Everyone here is offering their assistance in their free time. We may not answer immediately but someone will respond to your questions.
Hello! I'm trying to make TOTK mod that modifies one specific animation. TLDR: I need some guidance on how to import-export animation files between romfs and blender.
The only relevant guide I found was patreon Animate for TOTK guide. I do exactly what the guide tells. The last point I see my animation is in toolbox before exporting it to the switch. When I enter the game the object just disappears and game crushes after I enter-exit map or menu. The only weird thing I noticed is that original animation "baked size" parameter is 544 and that of modified animation is 0. Yet the animation plays in blender and switch toolbox, so I'm stumbled.
When I read the guides on how to backup NAND,I got confused. There is a option in Hekate tools, which are toogle on "SD emuMMC Raw Partition". What does it do? Should it be "on" or "off"?
What happens if I restore the NAND with the "off" option?
When I read the guides on how to backup NAND,I got confused. There is a option in Hekate tools, which are toogle on "SD emuMMC Raw Partition". What does it do? Should it be "on" or "off"?
What happens if I restore the NAND with the "off" option?
From what I can see, neither rentry nor NH Switch guide mentions that option during their NAND backup process.
Only place where I've found that option being mentioned is here, when you're about to upgrade your SD card (under step 14).
If you're moving from one to another SD card, I'd suggest this guide (NxNandManager method is what I've personally used the other day).
When I read the guides on how to backup NAND,I got confused. There is a option in Hekate tools, which are toogle on "SD emuMMC Raw Partition". What does it do? Should it be "on" or "off"?
What happens if I restore the NAND with the "off" option?
Is it possible to dump your carts without installing anything on your Switch? Like using the fusee exploit to run hekate or some other application to dump the games but otherwise not in any way "hacking" the switch with CFW or emunand or anything like that? I have already used to dump a backup of my nand without altering my switch so I can still take it online, but I don't know if this can be also used to dump my carts.
From what I can see, neither rentry nor NH Switch guide mentions that option during their NAND backup process.
Only place where I've found that option being mentioned is here, when you're about to upgrade your SD card (under step 14).
If you're moving from one to another SD card, I'd suggest this guide (NxNandManager method is what I've personally used the other day).
Is it possible to dump your carts without installing anything on your Switch? Like using the fusee exploit to run hekate or some other application to dump the games but otherwise not in any way "hacking" the switch with CFW or emunand or anything like that? I have already used to dump a backup of my nand without altering my switch so I can still take it online, but I don't know if this can be also used to dump my carts.
Okay well technically there is something but many people haven't gotten their first shipment yet. There is this new product called Mig Switch and while Mig Switch itself is a flashcart, that team also released a dumper. Now aside from the fact that some people haven't received their order yet, the dumper is around $80 and I'm not even sure if there is a way to buy it alone. But there is no homebrew nor software that can dump cartridges without hacking the console first. If you're that worried about hacking your console though, just download the dumps online. They're all the same anyway unless you plan on going online which is impossible for cartridge dumps without, ironically, the Mig Switch.
Hi, I'm having the issue where I can't open certain games which gives me the above error message. I installed Hekate, Atmosphere, Checkpoint, Sys-clk manager, Tesla-menu, and NX-installer. All those programs work with no issues. If I try to open up Pokemon Violet or Smash Ultimate, it says "Unable to Start Software. Redownload the data". Weirdly enough, Pokemon Shield opens with no problems and plays fine. I've tried fixing the issue by resetting the cache in the Switch settings, deleting the game and redownloading the data, updating sigpatches with sigpatchupdater by ITotalJustice, restarting the console and nothing has changed, doing a check for corrupted data which did say I had corrupted data for both Smash and Pokemon Violet. I backed up my save files with Checkpoint but I can't open those two games. All the software and firmware is up to date. Any ideas on what to do?
Post automatically merged:
"Unable to Start Software. Redownload the data"
Hi, I'm having the issue where I can't open certain games which gives me the above error message. I installed Hekate, Atmosphere, Checkpoint, Sys-clk manager, Tesla-menu, and NX-installer. All those programs work with no issues. If I try to open up Pokemon Violet or Smash Ultimate, it says "Unable to Start Software. Redownload the data". Weirdly enough, Pokemon Shield opens with no problems and plays fine. I've tried fixing the issue by resetting the cache in the Switch settings, deleting the game and redownloading the data, updating sigpatches with sigpatchupdater by ITotalJustice, restarting the console and nothing has changed, doing a check for corrupted data which did say I had corrupted data for both Smash and Pokemon Violet. I backed up my save files with Checkpoint but I can't open those two games. All the software and firmware is up to date. Any ideas on what to do?
Hi, I'm having the issue where I can't open certain games which gives me the above error message. I installed Hekate, Atmosphere, Checkpoint, Sys-clk manager, Tesla-menu, and NX-installer. All those programs work with no issues. If I try to open up Pokemon Violet or Smash Ultimate, it says "Unable to Start Software. Redownload the data". Weirdly enough, Pokemon Shield opens with no problems and plays fine. I've tried fixing the issue by resetting the cache in the Switch settings, deleting the game and redownloading the data, updating sigpatches with sigpatchupdater by ITotalJustice, restarting the console and nothing has changed, doing a check for corrupted data which did say I had corrupted data for both Smash and Pokemon Violet. I backed up my save files with Checkpoint but I can't open those two games. All the software and firmware is up to date. Any ideas on what to do?
I see that you've done plenty of checks already. I wonder if your SD card is legit? Did you check it with h2testw before using? That's what I usually do.
If you're 100% sure that it's a legit card, I wonder if you're using emuMMC/emuNAND setup? If so, there are two caches to be cleared as you have both stock and emulated NAND on your console. The way you usually do it on sysNAND / OFW is the following:
Make sure that your Internet connection is disabled if you're connected right now and remove any saved connections as well.
Turn off your console (when in home menu, hold the power button for a few seconds and select power off).
Hold volume + and volume - at the same time and, while holding them, press the power button. After a while your Switch will enter into the maintenance mode. At this point any pending update is deleted and cache is cleared.
Press the power button once again. It'll shut down the console. The cache will be cleared upon exit as well as any pending update.
On emuNAND, step 3 is a bit different: Right before you send your fusse.bin payload, hold volume + and volume - at the same time. Keep holding until you get into maintenance mode (you'll see Atmosphere bootlogo first, Switch logo after that one). After a while your Switch should enter into the maintenance mode. At this point the cache and any pending update is cleared.
Once done, boot into CFW the way you usually do and games might work.
If that doesn't help, try reinstalling the game with DBI installer. Make sure that the files you're about to install aren't corrupted either.
Other than that, if the games still won't work, check this thread for more troubleshooting info. Good luck!
Not sure it's a noob question but I'll just go for it : are there any unofficial retroarch Switch cores, like the one for 3DS ? If yes, which ones ? Without using Lakka ?
I broke the backplate of my switch and now the SD card reader keeps un-seating itself. Do I need to replace the backplate or is there a different method? Asking so I don't have to spend $15 on a replacement from iFixit when there's a way to do it with like a paperclip or something.
Hello everyone, I've read several guides and watched various videos on YouTube, but I wanted to make sure that the procedure I will use for my OLED switch is correct. I'm purchasing this chip on AliExpress:
.
Is it ok?
I'll start by flashing the chip (if it's not already patched).
Then, I'll install Picofly following step by step this video: . After doing this, do I just need to insert some files into the SD card and I'm done.
Is that correct?
As each year passes, retro games become harder and harder to play, as the physical media begins to fall apart and becomes more difficult and expensive to obtain. The...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
With just a couple weeks after its initial release in the App Store, the Delta emulator for iOS was received with great success, after Apple loosened up its rules in...
With the vast success of Super Mario Maker and its Switch sequel Super Mario Maker 2, Nintendo fans have long been calling for "Maker" titles for other iconic genres...
Retro handheld manufacturer Anbernic has revealed its first clamshell device: the Anbernic RG35XXSP. As the suffix indicates, this handheld's design is inspired by...
After rumour got out about an upcoming NES Edition release for the famed Nintendo World Championships, Nintendo has officially unveiled the new game, titled "Nintendo...
The number of layoffs and cuts in the videogame industry sadly continue to grow, with the latest huge layoffs coming from Microsoft, due to what MIcrosoft calls a...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
As each year passes, retro games become harder and harder to play, as the physical media begins to fall apart and becomes more difficult and expensive to obtain. The...
Ubisoft has today officially revealed the next installment in the Assassin's Creed franchise: Assassin's Creed Shadows. This entry is set in late Sengoku-era Japan...
After several months of work, the Harbour Masters 64 team have released their first public build of 2Ship2Harkinian, a feature-rich Majora's Mask PC port. This comes...
After a little more than three years of exclusivity with the Epic Games Store, Square Enix has decided to bring their beloved Kingdom Hearts franchise to Steam. The...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
After rumour got out about an upcoming NES Edition release for the famed Nintendo World Championships, Nintendo has officially unveiled the new game, titled "Nintendo...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
The number of layoffs and cuts in the videogame industry sadly continue to grow, with the latest huge layoffs coming from Microsoft, due to what MIcrosoft calls a...