anyone?i am trying to try the wire trick thing, i put a wire between pin 9 and 10, then powered on and pressed vol up, then it just booted normally.
what i am missing?
anyone?i am trying to try the wire trick thing, i put a wire between pin 9 and 10, then powered on and pressed vol up, then it just booted normally.
what i am missing?
That's why I said an original copy. I could have been more clear thoughActually you need the lot that has carts with 000 in the end. The newer versions of Pokken end up installing 3.0.1.
Do you have the switch connected to a computer and have everything set up properly?anyone?
no, i thought that's only if i want to install something, not to trigger the exploit.That's why I said an original copy. I could have been more clear though
Do you have the switch connected to a computer and have everything set up properly?
AFAIK, triggering the exploit will boot your Switch into RCM which is essentially a black screen. In other words, when you power on the Switch, instead of seeing the Nintendo logo, your Switch will power on and the screen will stay dark. If you have Linux, OSX, or some way to emulate those, you can launch a sample payload to get a non-black screen as proof of doing everything right. There's a thread with some payloads you can test, but it will require one of those operating systems.no, i thought that's only if i want to install something, not to trigger the exploit.
do i need to set up a virtual server?
Hey, I'm on a Firmware above 3.0 right now (4.1.0 if I remember correctly) and wanted to ask if it makes any sense to stay there, after all the new exploits got released. Does it even matter if I update to 5.0.2 now?
short summary for pre-Mariko units:
1.0.0: has a nice non-coldboot solution, and is the most likely to get a Holy Grail CFW-launching exploit in the future
<3.0.1: has enough power to avoid a hardmod immediately, even if you'll probably want to just do the hardmod 'cuz the hardmod's so easy
<=4.1.0: will eventually see a hardmod-less solution, but will need that 'minor hardmod' at launch
>4.1.0: that 'minor hardmod' is required; though we may find a solution to avoid this in the future
find a good one. cheap cables can damage your switch. try to find one with 4-5 stars on amazonCan I use any usb-c cable? I mean like the cheapest I find?
I don't think there's really a "minimum soeed" I would get a 32gig or higher SD card, but there's not really a minimum speedWhat's the minimum SD speed people think will be required? Even if it's a VERY ROUGH guess i would like to know. It's basically impossible to buy a legit SD card where i live so i have o import it, and the customs office here charges exorbitant taxes, so i would like the estimate to start saving.
https://www.thingiverse.com/thing:2877484where can i download the 3d printing file?
Yes, firmwares 3.01-4.1 will have to use the hardmod for the time being, but ReSwitched has stated there will be a softmod solution down the road. How far down the road is anyone's guess.I've been looking around for a Switch, and can only seem to find consoles with serial numbers matching a 3.0.1, which is fine, as I have access to a 3D printer and I'm willing to use a hardware mod to eventually get CFW. Am I right to understand that a 3.0.1 Switch (at least for now) is the same as having a 4.1.0 console, and I can therefore buy BOTW and Mario Odyssey carts to play? Or should I just keep it at 3.0.1 and wait patiently?
If you don't want to do a hardmod, you'll be waiting a while. It's not a hard thing to do, so I would just updateHi guys. My Switch is on FW 4.1.0. I have DNS set to block updates. Anyway, the more games are coming out (DKC TF today, Mega Man X Collection, and the new and upcoming Smash Bros), I am afraid I will have to update the FW to 5.0 and beyond. I really don’t want to miss out on CFW and been hearing that I will need to do hard mod with higher firmware. I have no experience with hardware modding. What should I do? Thoughts and help appreciated [emoji4][emoji4]
Sent from my iPhone using Tapatalk
If you don't want to do a hardmod, you'll be waiting a while. It's not a hard thing to do, so I would just update