prod.keys will change upon updating to 7.x, title.keys changes when you install a new gameProd.keys and title.keys
prod.keys will change upon updating to 7.x, title.keys changes when you install a new gameProd.keys and title.keys
Typical buggy Goldleaf. Try another title installer like Adubbz Tinfoil. If you want to install via USB with Tinfoil, you can use stuff like Aluminum Foil or Fluffy. Both have links not only to the respective program on your computer but also a recommended build of Tinfoil.Yo my dudes!
I successfully switched to Atmosphere and currently am on the 7.0 or whatever is the latest. Everything seems to be going great, except I cannot make Gold leaf/Gold tree. When I run gold tree after choosing USB launcher from Gold leaf, it wont detect my switch. I tried restarting the pc, switch and both gold apps but no success. I have installed libusbK (v3.0.7.0) using Zadig.
Blue screens are usually due to a mismatch between boot0/boot1 and the firmware. Line them up again with ChoiDujour.
lzma: Decoding error = 1
That question is outside of my pay grade.I'm starting to believe that my issue may be even more basic than a boot0/1 / FW mismatch. If I understand correctly, the ChoiDujour method involves creating new images and loading them into flash with the use of memloader. This would not be using the BCT at all, correct?
I can run memloaderv3 through RCM, and I get the list of ini files that I have put on my uSD card, so at least the uSD has been confirmed working. When I try to select any of the ini files, it fails with:
Code:lzma: Decoding error = 1
So, now I'm looking at the memloader source to see what it's trying to decompress. It looks like it's MTC tables, so I believe that means that SDRAM hasn't even been initialized yet. It also looks like the MTC tables are provided by a header file and built into memloader. How would that fail decompression unless part of memloader got corrupted during the USB transfer?
I may also be getting out of NOOB territory with this stuff, so here's a NOOB question. Does memloader depend on anything in flash?
Thanks
What version of SX OS are you using?Good Day.
I use sx os pro. My switch was on firmware version 5.0
I set up EMUNAND using Sx os and upgraded the Emunand on the sd card to 6.2.0.
My switch is in AUTO RCM.
Now when I try to launch the payload to start my switch, the Sx Os screen pops on, then black screen. Tried holding power 30 secs, power + volume up 30 secs,
attached jig, and repeated. with jig - no sx os popping up.
Please help is there any way to fix this?
SHould I format my micro sd card?
You can pretty much do anything current CFW can do such as launch backups, mod games, play homebrew, etc. There are 3 available CFW to pick from each with their own quirks and advantages but none reign supreme in my opinion although one of them costs money which is SX OS. My personal recommendation is ReiNX but Atmosphere is a close second.I'm new to the switch scene and currently have a launch edition on 4.0.1 and was wondering what I can do with it.
Hey so I made some progress, based on your comment, i tried upzipping the latest boot.dat sx os version 2.5.3 onto the sd card.using
Format the SD card to FAT32.Hey so I made some progress, based on your comment, i tried upzipping the latest boot.dat sx os version 2.5.3 onto the sd card.
so after doing that, the switch is powering on agn.
the system version says 6.2.0, I checked its booted in EMUNAND.
now the new problem. It says now that a system update is required to use the Micro SD card.
I cant access the folder "album", nor can I open any Roms.
PLEASE HELP.
Thanks again for your input earlier.
Is there a simple way to convert xci to nsp or is it quicker to just download them in nsp format.
Something I've noticed from copying files to the sd card, tinfoil or aluminium foil was crashing when trying to usb them over and it was through luck, whilst trying to get fluffy working that i replaced tinfoil with a recommended version that worked on my5.1.0. It would be great if we could include notes which say what versions of apps worked with cfw ect
if you need to use a program to convert I recommend 4nxci but getting them as nsp is fine
You can copy paste in fat 32 if all the files are under 4gb, that's the max fat32 will let youif i take everything from my 128GB sd card , put it somewhere , format from exfat to fat32 , can i just put all the previously installed game from nsp on it, by drag and drop from the backup or are there any files too big (since fat32 require nsp splitting/usb to install ) or any other reason i should know as why it wouldnt work before i try . latest atmosphere and update if that change something .
You can copy paste in fat 32 if all the files are under 4gb, that's the max fat32 will let you
That question is outside of my pay grade.
I know Lacius already explained all of the different firmware requirements including the one that cannot be bypassed which is the software development kid used to develop that particular title.Ok so.... I was almost certain to update to 7.0.1, using choidujurnx bla,bla,bla... And think...
if maybe is a way in the future still be able to play newest releases staying in this firmware...I'm never going to go online, just offline so wondering if any god out here knows or think it may be a possibility???
Dang it.....stop using the new kits goddamn developers lolI know Lacius already explained all of the different firmware requirements including the one that cannot be bypassed which is the software development kid used to develop that particular title.