I have two suggestions on how to fix your problemI'm blind just found it in the main tx page.
I'm not really bricked, its kinda Semi.
my EMUNAND works fine, my SYSNAND is the one I can't boot to.
its similar in your quote
so this is normal that EMUNAND Works and SYSnand is bricked?
I don't think so. I was also dumping my prod.keys and get a few errors on lockpick RCM, it can't even detect the 10.0.0 emunand
also on sx core firmware 1.2 my secure_boot_key is bunch of 'f' and when updated to 1.3 sx core firmware it shows some keys but get bunch of corrupted key blob error.
the nor version dumps some keys dunno if they are valid as they are only 41 keys compared to the prod.keys I dump on my brothers switch which was unpatched
Hate to break it to you but it does used it multiple times.Checkpoint 3.7.4 doesn't work on Mariko Switch on the latest version of SX
I’ve been trying to run it in applet mode and it says to restart sx every time I try. Can you get it to run by going straight to homebrew and clicking checkpoint?Hate to break it to you but it does used it multiple times.
If it failed to mount save stop running the game first
I’ve been trying to run it in applet mode and it says to restart sx every time I try. Can you get it to run by going straight to homebrew and clicking checkpoint?
Checkpoint 3.7.4 doesn't work on Mariko Switch on the latest version of SX
Supposedly you can use choidujournx now if you have v3.03 with their firmware update. What TX said is it’ll still brick but SXOS will fix it so you can still boot emunand etc normally basically you won’t notice it’s bricked(?) also if you bricked it before v3.03 run sxupdater with your switch connected to computer via usb debug port and flash firmware v1.3 it unbricks it.
hi guys, i have a mariko console with sx core installed,so if use the sx os 3.0.3 can i use ChoidujourNX for update to 10.0.4 without any risk? or better update with the nintendo servers?? thanks for the help !
--------------------- MERGED ---------------------------
hi, i have a mariko console with sx core installed,so if use the sx os 3.0.3 can i use ChoidujourNX for update to 10.0.4 without any risk? or better update with the nintendo servers burning the fuses??,i still dont have a good info about if i use sx os 3.0.3 i can use Choidujour for update offline without any risk i really need update the console, thanks for the help,
firmware 1.3 and sx os 3.0.3 should fixed the brick by ChoidujourNX and also make it safe to use ChoidujourNX on your mariko switch.
if you are worried, use/create EMUNAND.
when I booted up sx os 3.0.3 on mine it asked to update my firmware to 1.3 (I also didn't put the debug usb)
check your firmware version booing to sx os boot menu (power + vol+) -> option -> SX Core
if on firmware 1.3 and so os 3.0.3 you can safely use Choidujour to update it on the new page of TX that's it safe to use now. Dunno about updating online.
FML i got this problem for sysnand now im dead
use Choidujour do i need update first the sx core to 1.3 using the little ubs port?? because i dont install it :-(
Hi guys,well here is my case,well is a friend of mine,we install sx core in a mariko console everything goes fine,we put sx os in the micro sd card fat32 and boo fine,say about update sx core to 1.3 so we update and the console boot perfect,BUT then my friend use ChoidujourNX for offline update and now the switch only boot to sx logo and sx options but thats it,after that only get black screen,
he trusted himself because whsta tx say about this "If you have updated SX OS past 3.03, it will be safe to update using Choi" so right now he can dump nand but can figure out whats can do now,because if sx core is in 1.03 and sx os in 3.03 why the console wont boot? really aprecaite any advice guys thanks a lot
--------------------- MERGED ---------------------------
we do exact that as you say and console only show black screen after sx menu,we install sx core in a mariko console everything goes fine,we put sx os in the micro sd card fat32 and boo fine,say about update sx core to 1.3 so we update and the console boot perfect,BUT then my friend use ChoidujourNX for offline update and now the switch only boot to sx logo and sx options but thats it,after that only get black screen,
he trusted himself because whsta tx say about this "If you have updated SX OS past 3.03, it will be safe to update using Choi" so right now he can dump nand but cant figure out whats can do now,because if sx core is in 1.03 and sx os in 3.03 why the console wont boot? really aprecite any advice thanks a lot
does booting on CFW or CFW emunand shows a Nintendo logo then a switch logo before going black screen?
Did you make a NAND backup at any point before wiping the serial?
Correct me if I am wrong gbatemp but from what I understand if you used Choi to update anything, it'll brick the sysnand. The 1.3 core firmware "detects"(?) this and fixes what Choi breaks. TX was very clear that Choi is still bricking HOS, but the core unit will turn around and fix it.
If you bricked your console without the 1.3 firmware on the core you'll need to use the flex ribbon Micro USB on the core to update via the TX firmware updater software (Windows only atm).
If you have a working Switch using 3.03 sxos will update the core, making core ready to deal with Choi's incompatibility with Mariko and iPached(?) units.
I have not tested any of this, nor am I comfortable with trying yet... Waiting to see how things play out. I'm on 10.0.4 so I've got time.
Also if you cut the RF shield you'll have the room you need.
i didnt its now bricked i got a new nand backup with the prodinfo but i need the biskeys to decrpyt it i contacted blawar and he gave me a program to restore it buttt i still need the bis keysDid you make a NAND backup at any point before wiping the serial?
Correct me if I am wrong gbatemp but from what I understand if you used Choi to update anything, it'll brick the sysnand. The 1.3 core firmware "detects"(?) this and fixes what Choi breaks. TX was very clear that Choi is still bricking HOS, but the core unit will turn around and fix it.
If you bricked your console without the 1.3 firmware on the core you'll need to use the flex ribbon Micro USB on the core to update via the TX firmware updater software (Windows only atm).
If you have a working Switch using 3.03 sxos will update the core, making core ready to deal with Choi's incompatibility with Mariko and iPached(?) units.
I have not tested any of this, nor am I comfortable with trying yet... Waiting to see how things play out. I'm on 10.0.4 so I've got time.
Also if you cut the RF shield you'll have the room you need.
hi!,nop only show the sx logo and then sx menu and thats all,after that black screen,i in sx core 1.3 and sx os 3.03
i didnt its now bricked i got a new nand backup with the prodinfo but i need the biskeys to decrpyt it i contacted blawar and he gave me a program to restore it buttt i still need the bis keys