I have it charged up with the green light, latest boot.dat file on SD card (even redownloaded it to make sure it wasn't corrupted). Nothing is getting the dongle to push the payload. I know it's getting into RCM correctly because I was able to boot SX OS unactivated with TegraRCMgui. Tried booting it both with the dongle in on power, and tried putting it in after powering up, neither did anything. I've emailed both ModChipsDirect and Team Xecuter about this issue, but wanted to post here to see if anyone else has run into this issue and/or has come up with a solution.
EDIT: For those wondering, I've since managed to get a replacement from ModChipsDirect that luckily has worked as expected for the last week or so. Get in touch with your reseller if you're having the same issues I had. It's most likely caused by bad capacitors.
EDIT: For those wondering, I've since managed to get a replacement from ModChipsDirect that luckily has worked as expected for the last week or so. Get in touch with your reseller if you're having the same issues I had. It's most likely caused by bad capacitors.
Last edited by CoolFangs,