So I bought a brand new LEGIT (yes I checked) SD Card, formatted it to Fat 32 and I am trying to set up a new system for weeks and I am just failing and I need some serious help.
1) My SysNand is still on 4.1.0, should I leave it at that or burn the fuses? I have an unpatched early model Switch (I think those are called Mariko V1 but I am not sure)
2) So my EmuNand is of course also still at 4.1.0 but I want to get everything working before I update the firmware (of just the EmuNand) and nothing works
3) When I open Gold Leaf it crashes back to Hekate
4) When I try Tinfoil I get
"Error Failed to enable DS"
"Error usbDsRegisterInterface failed 594B000"
So when I try to install a NSP nothing happens.
5) DBI also can not connect. It never worked on my brand new computer while it worked on my older computer, both using Win 10. Now it doesn't work on any machine.
I have read "If you cannot work it out, please download Zadig from https://zadig.akeo.ie/
then open the device manager and see if DBI is detected there (you might see it with an exclamation mark on it)
Run Zadig, then list all devices, select DBI, and install the LIBUSBK driver for it"
Zadig does not show me DBI. It only lists Switch under systems and I already installed the LIBUSBK driver for Switch.
YES I do use a brand new USB C cable in fact I got a lot of new USB C cables so it can not be the fault of the cable.
---
I have tried to install this
https://github.com/sthetix/HATS
but when I try to get into emuMMC I get the Atmos logo, Nintendo logo and then a black screen and nothing.
So now I am using THIS package that contains Atmos which lets me boot into emuMMC
https://switchway.net/update-atmosphere/
This a lot for your help. I really can not figure out how to install any NSP.
1) My SysNand is still on 4.1.0, should I leave it at that or burn the fuses? I have an unpatched early model Switch (I think those are called Mariko V1 but I am not sure)
2) So my EmuNand is of course also still at 4.1.0 but I want to get everything working before I update the firmware (of just the EmuNand) and nothing works
3) When I open Gold Leaf it crashes back to Hekate
4) When I try Tinfoil I get
"Error Failed to enable DS"
"Error usbDsRegisterInterface failed 594B000"
So when I try to install a NSP nothing happens.
5) DBI also can not connect. It never worked on my brand new computer while it worked on my older computer, both using Win 10. Now it doesn't work on any machine.
I have read "If you cannot work it out, please download Zadig from https://zadig.akeo.ie/
then open the device manager and see if DBI is detected there (you might see it with an exclamation mark on it)
Run Zadig, then list all devices, select DBI, and install the LIBUSBK driver for it"
Zadig does not show me DBI. It only lists Switch under systems and I already installed the LIBUSBK driver for Switch.
YES I do use a brand new USB C cable in fact I got a lot of new USB C cables so it can not be the fault of the cable.
---
I have tried to install this
https://github.com/sthetix/HATS
but when I try to get into emuMMC I get the Atmos logo, Nintendo logo and then a black screen and nothing.
So now I am using THIS package that contains Atmos which lets me boot into emuMMC
https://switchway.net/update-atmosphere/
This a lot for your help. I really can not figure out how to install any NSP.
