I just got one of these today and either it's defective or I messed it up. When I first got it, I plugged it into my PC and it showed up as a drive. First thing I did was copy all the files so I have a backup. Then I extracted the 1.1 firmware files to the drive. I removed the usb cable and re-inserted to start the upgrade process. But I got no indication that anything was updated, and now when I go to look at the files there is nothing there. Looks like the RCMLoader drive is empty, but if I right click and choose "properties", it says there is around 300k used. That is about the size of all the files I copied earlier, so it seems like the files are on the drive, but I can't access them. I tried to copy the backed up files back to the drive to see if they would overwrite and then fix things, but that didn't work. Odd thing is, now only the ATMOSPHERE_HEKATE folder is visible, which is good I guess as that's the payload I've been using since I hacked my Switch. I put the updated hekate_ctcaer_4.6.bin file in there and renamed it payload.bin. I tested it on my switch, and it seems to be working OK, but I'm concerned that I'm not able to see the rest of the files/folders and there might be problem. What should I try? Should I try to format the drive and copy the backed up files over? Should I contact the vendor (AliExpress)?
The only thing I think that could have happened, is that I tried to update the firmware before the battery had enough charge? It had only been plugged in for a few minutes, and the white LED was still pulsing (it still is now, 5 hours later....) . What do you guys think?