I got my Swiss disc, SD2SP2 adapter, and my Xeno 2 chip from eBay for just a little over $12 USD, and they arrived today in my mailbox. And since my cube is one of the late DOL-001 units without the SP2 port, I wired that bitch directly into the header holes on the motherboard, and stealthed it into the SP2 port compartment. Then I soldered in the Xeno chip, and did the laser pot tweak. My laser is sitting at a comfy 208K. Boots directly into the Swiss disc from cold boot. All games load fine from the 64GB micro SD card. Formatted as FAT32 with 64K cluster size. Loving that all my favorite games are now just a few button presses away without resorting to emulation. Even my Gameboy games play fine via GBI at 240p using the GB Player. Was fun to finally buckle down and mod one of my GameCubes, as it was long overdue. I changed the clock battery too while I was in there, since it had just over 1 volt left in it. I'll change out the LED for a white one later.