One, MediCat USB will be getting it's own site for documentation, at https://medicatusb.xyz/ and is currently under construction. @MON5TERMATT is currently crunching on the website design, and AAA3A's MediCat Documentation will be posted there. So that will be a resource for people needing guidance, and will also be posted on the official MediCat USB Discord.
Another cool announcement is that I upgraded the Raspberry Pi 4's case to a clear acrylic one, with all the ports pointing out the back. It also gives me a 3rd USB 2.0 port to use for a dedicated KB+Mouse dongle, without being clustered around the other USB ports. This case also gives me 2 full-sized HDMI, making for easier connection to a display when I need desktop access to it.
Here's a picture of the new case. I re-used the 40mm RGB fan, cleaned out all the dust, and was even able to squeeze the SSD inside, although it was a VERY tight fit, and took a lot of trial and error. A slimmer USB to SATA adapter should mitigate that later on, but it works fine for now.
Another cool announcement is that I upgraded the Raspberry Pi 4's case to a clear acrylic one, with all the ports pointing out the back. It also gives me a 3rd USB 2.0 port to use for a dedicated KB+Mouse dongle, without being clustered around the other USB ports. This case also gives me 2 full-sized HDMI, making for easier connection to a display when I need desktop access to it.
Here's a picture of the new case. I re-used the 40mm RGB fan, cleaned out all the dust, and was even able to squeeze the SSD inside, although it was a VERY tight fit, and took a lot of trial and error. A slimmer USB to SATA adapter should mitigate that later on, but it works fine for now.