I hope so, the update should be workingCan we remove USB port and update without this in 2.6 alpha?
I hope so, the update should be workingCan we remove USB port and update without this in 2.6 alpha?
I will gladly take it off your hands just let me knowI am going to sell it as-is broken for parts.
then u havent connected ur cable properly to the capsI've done that but no metter what I get blue than cyan color
I've retouched the caps for better connection and the connection are solid.then u havent connected ur cable properly to the caps
blue then cyan is a issue with cpu cable/mosfett
maybe mosfet maybe broken flex cable , take a multimeter and see if u have continuity on the trace going from the mosfets s to the caps and g to the pin 3/4 and D to ground on the capsI've retouched the caps for better connection and the connection are solid.
I don't know what to do else.
Can it be the mosfets are bad?
Are you using 1 mosfet ? Or 2?I've retouched the caps for better connection and the connection are solid.
I don't know what to do else.
Can it be the mosfets are bad?
I've disconnected the flex and checked the flex.The continuety is there up to the mosfet.No problem there.maybe mosfet maybe broken flex cable , take a multimeter and see if u have continuity on the trace going from the mosfets s to the caps and g to the pin 3/4 and D to ground on the caps
check ur cable going from rp to pin 3 and for , are u sure u solderd it to the right point on the raspi ?
I'm using a felx cable form the hwfly v2 flex and has 2 mosfetsAre you using 1 mosfet ? Or 2?
extrange, it seems to be working in my case.... powering off from hos few seconds it glitches again, but maybe the gren led light is a little bit weak but goes it off correctlyok, looks like auto hos power off is not working in 2.6 alpha, will fix that later
Well at this price I've bit the bullet on behalf of my partner and purchased this at a mere £22
View attachment 363326
Certainly hope we've done the right thing
The price seems very fair in my very humble opinion
It is nice to see it is getting cheaper and cheaper.
Had problems with those cheap CPU flex in the past, the transistors were poorly soldered, on not soldered at all for some points. You should check the continuity not only for the Gate connection (coming from Pico to the transistor), but as well for Drain and Source of each MOSFET --> the continuity should be good from MOSFET pin up to the point on the flex where you solder them to the caps.I've disconnected the flex and checked the flex.The continuety is there up to the mosfet.No problem there.
Post automatically merged:
I'm using a felx cable form the hwfly v2 flex and has 2 mosfets
Is this only for the oled ?Well at this price I've bit the bullet on behalf of my partner and purchased this at a mere £22
View attachment 363326
Certainly hope we've done the right thing
The price seems very fair in my very humble opinion
Is this only for the oled ?
Really not entirely sure tbh, here's the product https://www.aliexpress.com/item/1005005412303511.html?
Might bail on this if this works on a marikoReally not entirely sure tbh, here's the product https://www.aliexpress.com/item/1005005412303511.html?