No more Monthlies
Creating a Splash Screen
- Images should be 400x240 for the top screen or 320x240 for the bottom. There's a ~50px gap between the top and bottom screens.
- Convert images using this site
- Check "rotate 90°"
- Do not check "preserve transparency"
- Download the .bin file
- Rename the .bin file to "splash.bin" for top or "splashbottom.bin" for bottom
- Use 7zip or WinRar to compress the .bin file into a .zip archive
- Post a preview of the image and attach the .zip file to your post (.zip is preferred, but .rar works too)
Don't forget to attach corresponding splash.bin in .zip format
Be sure to post a preview of your image:
Assets
Updated: (4/3/2016)
*Some Logo PSD's are attached to this post:
- Magikarp font is Animated
- ReiNand font is Buxton Sketch
- Majora's Mask Icons
How to Install
- Be sure you are on the latest version of ReiNand
- Download the desired .zip or .rar file attached to a post
- Unpack using 7zip or WinRar
- Rename the desired .bin file to splash.bin
- Replace the splash.bin in your Rei folder
- Be sure you are on the latest version of Luma3DS
- Download the desired .zip or .rar file attached to a post
- Unpack using 7zip or WinRar
- Rename the desired .bin file to splash.bin or splashbottom.bin
- Replace the splash.bin or splashbottom.bin in your Luma folder
- Download the desired .zip or .rar file attached to a post
- Unpack using 7zip or WinRar
- Place in any path on SD card
- Open boot_config.ini with a simple text editor (Notepad/Notepad++)
- Add the following under a boot entry:
Code:
boot_splash = 1 screenEnabled = 1 splash_image = /PATH TO SPLASH/name_of_splash.bin delay = Extra Splash Display Time in Milliseconds (Integer)
Code:
[DEFAULT]
boot_splash = 1
screenEnabled = 1
splash_image = /Splashes folder/CakesSplash.bin
path = /Cakes.dat
delay = 200
offset = 0x12000
payload = -1
Attachments
Last edited by Sachi,