Hey Tempers,
I rebuild the painless-linux kernel with applied Lakka patches. That means we finally have bluetooth sound, fixed battery indicator and Joycon support in Painless Linux.
Install Painless-Linux as described here:
https://github.com/natinusala/painless-linux
Then extract the archive attached to this post and patch your Painless-Linux setup as described in the readme.txt.
Big thx to @natinusala for your help.
YesDoes this means we can now boot linux withouth trigger the battery bug on horizon?
Lakka works so if @DarkOrb has ported everything there, there is no reason why it shouldn't work with 128gb cards
Apply all of Lakka patches to your coreboot, u-boot and Linux. Check the config(s). Done.
edit : also use Lakka's repos as a base
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- Image
make
mmc0: Timeout waiting for hardware interrupt.
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- Image
I wrote the image to an SD Card using Win32 Disk Imager, and I tried 2 different SDHC cards, a Samsung 32GB card, and a Fujifilm 16GB card, but neither of them worked.
It can't find the /dev/mmcblk0p2 and then goes into
Code:mmc0: Timeout waiting for hardware interrupt.
I've tried using Etcher, Win32DiskImager, DD, and building the partition table myself and none of that has worked so far.@natinusala From what I understand, you are supposed to have a .dtb be generated when you compile the Linux kernel, but I don't see it when I look in the "linux/arch/arm64/boot/dts" directory. Is there something I am missing in this command?
Code:make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- Image
Also, what do we do with the u-boot files once we compile it? Do I need to store it in a certain location?
That's strange, it works fine on my 32gb SanDisk card. The two problems might be that the image file is corrupted or that you may need to use another program, like etcher.
Hey Tempers,
I rebuild the painless-linux kernel with applied Lakka patches. That means we finally have bluetooth sound, fixed battery indicator and Joycon support in Painless Linux.
Install Painless-Linux as described here:
https://github.com/natinusala/painless-linux
Then extract the archive attached to this post and patch your Painless-Linux setup as described in the readme.txt.
Big thx to @natinusala for your help.
[ 9.017]
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[ 9.017] Build Operating System: Linux Arch Linux
[ 9.017] Current Operating System: Linux alarm 4.16.5-g8efd0af-dirty #3 SMP PREEMPT Sat Jul 7 10:14:38 PDT 2018 aarch64
[ 9.017] Kernel command line: root=/dev/mmcblk0p2 rw fbcon=rotate:3 rootwait loglevel=4 ssh consoleblank=0
[ 9.017] Build Date: 22 June 2018 04:53:06PM
[ 9.017]
[ 9.017] Current version of pixman: 0.34.0
[ 9.017] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.017] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.018] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 12 16:33:52 2018
[ 9.041] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.043] (==) No Layout section. Using the first Screen section.
[ 9.043] (==) No screen section available. Using defaults.
[ 9.043] (**) |-->Screen "Default Screen Section" (0)
[ 9.043] (**) | |-->Monitor "<default monitor>"
[ 9.043] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.043] (==) Automatically adding devices
[ 9.043] (==) Automatically enabling devices
[ 9.043] (==) Automatically adding GPU devices
[ 9.043] (==) Automatically binding GPU devices
[ 9.043] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 9.049] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 9.049] Entry deleted from font path.
[ 9.049] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 9.050] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 9.050] Entry deleted from font path.
[ 9.050] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 9.050] Entry deleted from font path.
[ 9.065] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 9.065] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.065] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.065] (II) Module ABI versions:
[ 9.065] X.Org ANSI C Emulation: 0.4
[ 9.065] X.Org Video Driver: 24.0
[ 9.065] X.Org XInput driver : 24.1
[ 9.065] X.Org Server Extension : 10.0
[ 9.066] (++) using VT number 7
[ 9.066] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 9.070] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 9.087] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 9.089] (II) no primary bus or device found
[ 9.089] falling back to /sys/devices/platform/50000000.host1x/drm/drm/card1
[ 9.089] (II) LoadModule: "glx"
[ 9.093] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.136] (II) Module glx: vendor="X.Org Foundation"
[ 9.136] compiled for 1.20.0, module version = 1.0.0
[ 9.136] ABI class: X.Org Server Extension, version 10.0
[ 9.136] (==) Matched modesetting as autoconfigured driver 0
[ 9.136] (==) Matched fbdev as autoconfigured driver 1
[ 9.136] (==) Assigned the driver to the xf86ConfigLayout
[ 9.137] (II) LoadModule: "modesetting"
[ 9.138] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.148] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.148] compiled for 1.20.0, module version = 1.20.0
[ 9.148] Module class: X.Org Video Driver
[ 9.148] ABI class: X.Org Video Driver, version 24.0
[ 9.148] (II) LoadModule: "fbdev"
[ 9.148] (WW) Warning, couldn't open module fbdev
[ 9.148] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 9.148] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 9.170] (II) modeset(0): using drv /dev/dri/card1
[ 9.171] (II) modeset(G0): using drv /dev/dri/card0
[ 9.171] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.171] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 9.171] (==) modeset(0): RGB weight 888
[ 9.171] (==) modeset(0): Default visual is TrueColor
[ 9.171] (II) Loading sub module "glamoregl"
[ 9.171] (II) LoadModule: "glamoregl"
[ 9.171] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 9.215] (II) Module glamoregl: vendor="X.Org Foundation"
[ 9.215] compiled for 1.20.0, module version = 1.0.1
[ 9.215] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.594] (II) modeset(0): glamor X acceleration enabled on tegra
[ 10.594] (II) modeset(0): glamor initialized
[ 10.595] (II) modeset(0): Output DSI-1 has no monitor section
[ 10.595] (II) modeset(0): EDID for output DSI-1
[ 10.595] (II) modeset(0): Printing probed modes for output DSI-1
[ 10.595] (II) modeset(0): Modeline "720x1280"x60.0 78.00 720 856 928 1000 1280 1290 1292 1300 (78.0 kHz)
[ 10.595] (II) modeset(0): Output DSI-1 connected
[ 10.595] (II) modeset(0): Using sloppy heuristic for initial modes
[ 10.595] (II) modeset(0): Output DSI-1 using initial mode 720x1280 +0+0
[ 10.596] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 10.596] (==) modeset(0): DPI set to (96, 96)
[ 10.596] (II) Loading sub module "fb"
[ 10.596] (II) LoadModule: "fb"
[ 10.596] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.600] (II) Module fb: vendor="X.Org Foundation"
[ 10.600] compiled for 1.20.0, module version = 1.0.0
[ 10.600] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.601] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 10.601] (==) modeset(G0): RGB weight 888
[ 10.601] (==) modeset(G0): Default visual is TrueColor
[ 10.601] (II) Loading sub module "glamoregl"
[ 10.601] (II) LoadModule: "glamoregl"
[ 10.602] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 10.602] (II) Module glamoregl: vendor="X.Org Foundation"
[ 10.602] compiled for 1.20.0, module version = 1.0.1
[ 10.602] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.623] (II) modeset(G0): glamor X acceleration enabled on NV12B
[ 10.623] (II) modeset(G0): glamor initialized
[ 10.623] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 10.623] (==) modeset(G0): DPI set to (96, 96)
[ 10.623] (II) Loading sub module "fb"
[ 10.623] (II) LoadModule: "fb"
[ 10.623] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.623] (II) Module fb: vendor="X.Org Foundation"
[ 10.623] compiled for 1.20.0, module version = 1.0.0
[ 10.623] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.729] (==) modeset(G0): Backing store enabled
[ 10.729] (==) modeset(G0): Silken mouse disabled
[ 10.732] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 10.732] (==) modeset(G0): DPMS enabled
[ 10.732] (II) modeset(G0): [DRI2] Setup complete
[ 10.732] (II) modeset(G0): [DRI2] DRI driver: nouveau
[ 10.732] (II) modeset(G0): [DRI2] VDPAU driver: nouveau
[ 10.770] (==) modeset(0): Backing store enabled
[ 10.770] (==) modeset(0): Silken mouse disabled
[ 10.787] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 10.788] (==) modeset(0): DPMS enabled
[ 10.791] (II) modeset(0): [DRI2] Setup complete
[ 10.791] (II) modeset(0): [DRI2] DRI driver: tegra
[ 10.791] (II) modeset(0): [DRI2] VDPAU driver: tegra
[ 10.791] (II) Initializing extension Generic Event Extension
[ 10.794] (II) Initializing extension SHAPE
[ 10.795] (II) Initializing extension MIT-SHM
[ 10.795] (II) Initializing extension XInputExtension
[ 10.800] (II) Initializing extension XTEST
[ 10.800] (II) Initializing extension BIG-REQUESTS
[ 10.800] (II) Initializing extension SYNC
[ 10.801] (II) Initializing extension XKEYBOARD
[ 10.801] (II) Initializing extension XC-MISC
[ 10.801] (II) Initializing extension SECURITY
[ 10.802] (II) Initializing extension XFIXES
[ 10.802] (II) Initializing extension RENDER
[ 10.802] (II) Initializing extension RANDR
[ 10.803] (II) Initializing extension COMPOSITE
[ 10.803] (II) Initializing extension DAMAGE
[ 10.803] (II) Initializing extension MIT-SCREEN-SAVER
[ 10.804] (II) Initializing extension DOUBLE-BUFFER
[ 10.804] (II) Initializing extension RECORD
[ 10.804] (II) Initializing extension DPMS
[ 10.805] (II) Initializing extension Present
[ 10.805] (II) Initializing extension DRI3
[ 10.805] (II) Initializing extension X-Resource
[ 10.805] (II) Initializing extension XVideo
[ 10.806] (II) Initializing extension XVideo-MotionCompensation
[ 10.806] (II) Initializing extension GLX
[ 10.815] (II) AIGLX: Loaded and initialized tegra
[ 10.815] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 10.815] (II) Initializing extension XFree86-VidModeExtension
[ 10.816] (II) Initializing extension XFree86-DGA
[ 10.816] (II) Initializing extension XFree86-DRI
[ 10.816] (II) Initializing extension DRI2
[ 10.831] (II) modeset(G0): Damage tracking initialized
[ 10.837] (II) modeset(0): Damage tracking initialized
[ 10.838] (II) modeset(0): Setting screen physical size to 190 x 338
[ 11.173] (II) config/udev: Adding input device Joy-Con Rails (/dev/input/event0)
[ 11.173] (II) No input driver specified, ignoring this device.
[ 11.173] (II) This device may have been added with another device file.
[ 11.173] (II) config/udev: Adding input device Joy-Con Rails (/dev/input/js0)
[ 11.173] (II) No input driver specified, ignoring this device.
[ 11.173] (II) This device may have been added with another device file.
[ 11.174] (II) config/udev: Adding input device stmfts (/dev/input/event1)
[ 11.174] (**) stmfts: Applying InputClass "libinput touchscreen catchall"
[ 11.174] (II) LoadModule: "libinput"
[ 11.174] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 11.200] (II) Module libinput: vendor="X.Org Foundation"
[ 11.200] compiled for 1.20.0, module version = 0.28.0
[ 11.200] Module class: X.Org XInput Driver
[ 11.200] ABI class: X.Org XInput driver, version 24.1
[ 11.200] (II) Using input driver 'libinput' for 'stmfts'
[ 11.200] (**) stmfts: always reports core events
[ 11.200] (**) Option "Device" "/dev/input/event1"
[ 11.200] (**) Option "_source" "server/udev"
[ 11.201] (II) event1 - stmfts: is tagged by udev as: Touchscreen
[ 11.201] (II) event1 - stmfts: device is a touch device
[ 11.201] (II) event1 - stmfts: device removed
[ 11.218] (**) Option "config_info" "udev:/sys/devices/platform/7000c500.i2c/i2c-3/3-0049/input/input1/event1"
[ 11.218] (II) XINPUT: Adding extended input device "stmfts" (type: TOUCHSCREEN, id 6)
[ 11.218] (**) Option "AccelerationScheme" "none"
[ 11.218] (**) stmfts: (accel) selected scheme none/0
[ 11.218] (**) stmfts: (accel) acceleration factor: 2.000
[ 11.218] (**) stmfts: (accel) acceleration threshold: 4
[ 11.224] (II) event1 - stmfts: is tagged by udev as: Touchscreen
[ 11.224] (II) event1 - stmfts: device is a touch device
[ 11.227] (II) config/udev: Adding input device stmfts (/dev/input/mouse0)
[ 11.227] (II) No input driver specified, ignoring this device.
[ 11.227] (II) This device may have been added with another device file.
[ 11.229] (II) config/udev: Adding input device gpio-keys (/dev/input/event2)
[ 11.229] (**) gpio-keys: Applying InputClass "libinput keyboard catchall"
[ 11.229] (II) Using input driver 'libinput' for 'gpio-keys'
[ 11.229] (**) gpio-keys: always reports core events
[ 11.229] (**) Option "Device" "/dev/input/event2"
[ 11.229] (**) Option "_source" "server/udev"
[ 11.230] (II) event2 - gpio-keys: is tagged by udev as: Keyboard
[ 11.230] (II) event2 - gpio-keys: device is a keyboard
[ 11.230] (II) event2 - gpio-keys: device removed
[ 11.246] (**) Option "config_info" "udev:/sys/devices/platform/gpio-keys/input/input2/event2"
[ 11.246] (II) XINPUT: Adding extended input device "gpio-keys" (type: KEYBOARD, id 7)
[ 11.249] (II) event2 - gpio-keys: is tagged by udev as: Keyboard
[ 11.249] (II) event2 - gpio-keys: device is a keyboard
[ 11.272] (II) modeset(0): Disabling kernel dirty updates, not required.
[ 20.323] (II) modeset(0): Allocate new frame buffer 1280x720 stride
[ 94.367] (II) event1 - stmfts: device removed
[ 94.384] (II) event2 - gpio-keys: device removed
[ 94.403] (II) UnloadModule: "libinput"
[ 94.404] (II) UnloadModule: "libinput"
[ 94.489] (II) Server terminated successfully (0). Closing log file.
[ 9.019]
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[ 9.019] Build Operating System: Linux Arch Linux
[ 9.019] Current Operating System: Linux alarm 4.17.0-rc4-g3b5e1c00741b-dirty #2 SMP PREEMPT Sun Aug 12 11:37:29 PDT 2018 aarch64
[ 9.019] Kernel command line: root=/dev/mmcblk0p2 rw fbcon=rotate:3 rootwait loglevel=4 ssh consoleblank=0
[ 9.019] Build Date: 22 June 2018 04:53:06PM
[ 9.019]
[ 9.019] Current version of pixman: 0.34.0
[ 9.019] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.019] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.019] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 12 16:30:54 2018
[ 9.043] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.045] (==) No Layout section. Using the first Screen section.
[ 9.045] (==) No screen section available. Using defaults.
[ 9.045] (**) |-->Screen "Default Screen Section" (0)
[ 9.045] (**) | |-->Monitor "<default monitor>"
[ 9.046] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.046] (==) Automatically adding devices
[ 9.046] (==) Automatically enabling devices
[ 9.046] (==) Automatically adding GPU devices
[ 9.046] (==) Automatically binding GPU devices
[ 9.046] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 9.051] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 9.051] Entry deleted from font path.
[ 9.052] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 9.052] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 9.052] Entry deleted from font path.
[ 9.052] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 9.052] Entry deleted from font path.
[ 9.067] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/100dpi,
/usr/share/fonts/75dpi
[ 9.067] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 9.067] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.067] (II) Module ABI versions:
[ 9.067] X.Org ANSI C Emulation: 0.4
[ 9.067] X.Org Video Driver: 24.0
[ 9.067] X.Org XInput driver : 24.1
[ 9.067] X.Org Server Extension : 10.0
[ 9.068] (++) using VT number 7
[ 9.068] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 9.072] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 9.087] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 9.088] (II) no primary bus or device found
[ 9.088] falling back to /sys/devices/platform/50000000.host1x/drm/drm/card1
[ 9.089] (II) LoadModule: "glx"
[ 9.092] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 9.136] (II) Module glx: vendor="X.Org Foundation"
[ 9.136] compiled for 1.20.0, module version = 1.0.0
[ 9.136] ABI class: X.Org Server Extension, version 10.0
[ 9.136] (==) Matched modesetting as autoconfigured driver 0
[ 9.136] (==) Matched fbdev as autoconfigured driver 1
[ 9.136] (==) Assigned the driver to the xf86ConfigLayout
[ 9.136] (II) LoadModule: "modesetting"
[ 9.137] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.148] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.148] compiled for 1.20.0, module version = 1.20.0
[ 9.148] Module class: X.Org Video Driver
[ 9.148] ABI class: X.Org Video Driver, version 24.0
[ 9.148] (II) LoadModule: "fbdev"
[ 9.148] (WW) Warning, couldn't open module fbdev
[ 9.149] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 9.149] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 9.169] (II) modeset(0): using drv /dev/dri/card1
[ 9.170] (II) modeset(G0): using drv /dev/dri/card0
[ 9.170] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.170] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 9.170] (==) modeset(0): RGB weight 888
[ 9.171] (==) modeset(0): Default visual is TrueColor
[ 9.171] (II) Loading sub module "glamoregl"
[ 9.171] (II) LoadModule: "glamoregl"
[ 9.171] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 9.215] (II) Module glamoregl: vendor="X.Org Foundation"
[ 9.215] compiled for 1.20.0, module version = 1.0.1
[ 9.215] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.583] (II) modeset(0): glamor X acceleration enabled on tegra
[ 10.583] (II) modeset(0): glamor initialized
[ 10.583] (II) modeset(0): Output DSI-1 has no monitor section
[ 10.584] (II) modeset(0): EDID for output DSI-1
[ 10.584] (II) modeset(0): Printing probed modes for output DSI-1
[ 10.584] (II) modeset(0): Modeline "720x1280"x60.0 78.00 720 856 928 1000 1280 1290 1292 1300 (78.0 kHz)
[ 10.584] (II) modeset(0): Output DSI-1 connected
[ 10.584] (II) modeset(0): Using sloppy heuristic for initial modes
[ 10.584] (II) modeset(0): Output DSI-1 using initial mode 720x1280 +0+0
[ 10.584] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 10.584] (==) modeset(0): DPI set to (96, 96)
[ 10.584] (II) Loading sub module "fb"
[ 10.584] (II) LoadModule: "fb"
[ 10.585] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.589] (II) Module fb: vendor="X.Org Foundation"
[ 10.589] compiled for 1.20.0, module version = 1.0.0
[ 10.589] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.590] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 10.590] (==) modeset(G0): RGB weight 888
[ 10.590] (==) modeset(G0): Default visual is TrueColor
[ 10.590] (II) Loading sub module "glamoregl"
[ 10.590] (II) LoadModule: "glamoregl"
[ 10.590] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 10.590] (II) Module glamoregl: vendor="X.Org Foundation"
[ 10.590] compiled for 1.20.0, module version = 1.0.1
[ 10.591] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.610] (II) modeset(G0): glamor X acceleration enabled on NV12B
[ 10.610] (II) modeset(G0): glamor initialized
[ 10.610] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 10.610] (==) modeset(G0): DPI set to (96, 96)
[ 10.610] (II) Loading sub module "fb"
[ 10.610] (II) LoadModule: "fb"
[ 10.610] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.610] (II) Module fb: vendor="X.Org Foundation"
[ 10.610] compiled for 1.20.0, module version = 1.0.0
[ 10.610] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.716] (==) modeset(G0): Backing store enabled
[ 10.716] (==) modeset(G0): Silken mouse disabled
[ 10.718] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 10.718] (==) modeset(G0): DPMS enabled
[ 10.719] (II) modeset(G0): [DRI2] Setup complete
[ 10.719] (II) modeset(G0): [DRI2] DRI driver: nouveau
[ 10.719] (II) modeset(G0): [DRI2] VDPAU driver: nouveau
[ 10.757] (==) modeset(0): Backing store enabled
[ 10.757] (==) modeset(0): Silken mouse disabled
[ 10.770] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 10.770] (==) modeset(0): DPMS enabled
[ 10.772] (II) modeset(0): [DRI2] Setup complete
[ 10.772] (II) modeset(0): [DRI2] DRI driver: tegra
[ 10.773] (II) modeset(0): [DRI2] VDPAU driver: tegra
[ 10.773] (II) Initializing extension Generic Event Extension
[ 10.775] (II) Initializing extension SHAPE
[ 10.777] (II) Initializing extension MIT-SHM
[ 10.779] (II) Initializing extension XInputExtension
[ 10.784] (II) Initializing extension XTEST
[ 10.784] (II) Initializing extension BIG-REQUESTS
[ 10.785] (II) Initializing extension SYNC
[ 10.785] (II) Initializing extension XKEYBOARD
[ 10.785] (II) Initializing extension XC-MISC
[ 10.785] (II) Initializing extension SECURITY
[ 10.786] (II) Initializing extension XFIXES
[ 10.786] (II) Initializing extension RENDER
[ 10.786] (II) Initializing extension RANDR
[ 10.787] (II) Initializing extension COMPOSITE
[ 10.787] (II) Initializing extension DAMAGE
[ 10.787] (II) Initializing extension MIT-SCREEN-SAVER
[ 10.787] (II) Initializing extension DOUBLE-BUFFER
[ 10.788] (II) Initializing extension RECORD
[ 10.788] (II) Initializing extension DPMS
[ 10.788] (II) Initializing extension Present
[ 10.788] (II) Initializing extension DRI3
[ 10.789] (II) Initializing extension X-Resource
[ 10.789] (II) Initializing extension XVideo
[ 10.789] (II) Initializing extension XVideo-MotionCompensation
[ 10.789] (II) Initializing extension GLX
[ 10.799] (II) AIGLX: Loaded and initialized tegra
[ 10.799] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 10.799] (II) Initializing extension XFree86-VidModeExtension
[ 10.799] (II) Initializing extension XFree86-DGA
[ 10.800] (II) Initializing extension XFree86-DRI
[ 10.800] (II) Initializing extension DRI2
[ 10.817] (II) modeset(G0): Damage tracking initialized
[ 10.822] (II) modeset(0): Damage tracking initialized
[ 10.822] (II) modeset(0): Setting screen physical size to 190 x 338
[ 11.155] (II) config/udev: Adding input device Joy-Con Rails (/dev/input/event0)
[ 11.155] (II) No input driver specified, ignoring this device.
[ 11.155] (II) This device may have been added with another device file.
[ 11.156] (II) config/udev: Adding input device Joy-Con Rails (/dev/input/js0)
[ 11.156] (II) No input driver specified, ignoring this device.
[ 11.156] (II) This device may have been added with another device file.
[ 11.157] (II) config/udev: Adding input device stmfts (/dev/input/event2)
[ 11.157] (**) stmfts: Applying InputClass "libinput touchscreen catchall"
[ 11.157] (II) LoadModule: "libinput"
[ 11.157] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 11.181] (II) Module libinput: vendor="X.Org Foundation"
[ 11.182] compiled for 1.20.0, module version = 0.28.0
[ 11.182] Module class: X.Org XInput Driver
[ 11.182] ABI class: X.Org XInput driver, version 24.1
[ 11.182] (II) Using input driver 'libinput' for 'stmfts'
[ 11.182] (**) stmfts: always reports core events
[ 11.182] (**) Option "Device" "/dev/input/event2"
[ 11.182] (**) Option "_source" "server/udev"
[ 11.183] (II) event2 - stmfts: is tagged by udev as: Touchscreen
[ 11.183] (II) event2 - stmfts: device is a touch device
[ 11.183] (II) event2 - stmfts: device removed
[ 11.199] (**) Option "config_info" "udev:/sys/devices/platform/7000c500.i2c/i2c-3/3-0049/input/input1/event2"
[ 11.199] (II) XINPUT: Adding extended input device "stmfts" (type: TOUCHSCREEN, id 6)
[ 11.199] (**) Option "AccelerationScheme" "none"
[ 11.199] (**) stmfts: (accel) selected scheme none/0
[ 11.199] (**) stmfts: (accel) acceleration factor: 2.000
[ 11.199] (**) stmfts: (accel) acceleration threshold: 4
[ 11.206] (II) event2 - stmfts: is tagged by udev as: Touchscreen
[ 11.206] (II) event2 - stmfts: device is a touch device
[ 11.209] (II) config/udev: Adding input device stmfts (/dev/input/mouse0)
[ 11.209] (II) No input driver specified, ignoring this device.
[ 11.209] (II) This device may have been added with another device file.
[ 11.211] (II) config/udev: Adding input device gpio-keys (/dev/input/event1)
[ 11.211] (**) gpio-keys: Applying InputClass "libinput keyboard catchall"
[ 11.211] (II) Using input driver 'libinput' for 'gpio-keys'
[ 11.211] (**) gpio-keys: always reports core events
[ 11.211] (**) Option "Device" "/dev/input/event1"
[ 11.211] (**) Option "_source" "server/udev"
[ 11.212] (II) event1 - gpio-keys: is tagged by udev as: Keyboard
[ 11.212] (II) event1 - gpio-keys: device is a keyboard
[ 11.212] (II) event1 - gpio-keys: device removed
[ 11.231] (**) Option "config_info" "udev:/sys/devices/platform/gpio-keys/input/input2/event1"
[ 11.231] (II) XINPUT: Adding extended input device "gpio-keys" (type: KEYBOARD, id 7)
[ 11.234] (II) event1 - gpio-keys: is tagged by udev as: Keyboard
[ 11.234] (II) event1 - gpio-keys: device is a keyboard
[ 11.249] failed to add fb -6
[ 11.249] (EE) modeset(0): failed to set mode: No such device or address
[ 20.380] (II) modeset(0): Allocate new frame buffer 1280x720 stride
[ 20.390] failed to add rotate fb
[ 23.225] (WW) modeset(0): Page flip failed: No such device or address
[ 23.226] (EE) modeset(0): present flip failed
[ 23.362] (WW) modeset(0): Page flip failed: No such device or address
[ 23.362] (EE) modeset(0): present flip failed
[ 23.685] (WW) modeset(0): Page flip failed: No such device or address
[ 23.685] (EE) modeset(0): present flip failed
[ 23.695] (WW) modeset(0): Page flip failed: No such device or address
[ 23.696] (EE) modeset(0): present flip failed
[ 23.712] (WW) modeset(0): Page flip failed: No such device or address
[ 23.712] (EE) modeset(0): present flip failed
[ 23.727] (WW) modeset(0): Page flip failed: No such device or address
[ 23.727] (EE) modeset(0): present flip failed
[ 23.744] (WW) modeset(0): Page flip failed: No such device or address
[ 23.744] (EE) modeset(0): present flip failed
[ 23.764] (WW) modeset(0): Page flip failed: No such device or address
[ 23.764] (EE) modeset(0): present flip failed
[ 23.777] (WW) modeset(0): Page flip failed: No such device or address
[ 23.777] (EE) modeset(0): present flip failed
[ 23.795] (WW) modeset(0): Page flip failed: No such device or address
[ 23.795] (EE) modeset(0): present flip failed
[ 23.812] (WW) modeset(0): Page flip failed: No such device or address
[ 23.812] (EE) modeset(0): present flip failed
[ 23.827] (WW) modeset(0): Page flip failed: No such device or address
[ 23.827] (EE) modeset(0): present flip failed
[ 23.844] (WW) modeset(0): Page flip failed: No such device or address
[ 23.844] (EE) modeset(0): present flip failed
[ 23.861] (WW) modeset(0): Page flip failed: No such device or address
[ 23.868] (EE) modeset(0): present flip failed
[ 23.879] (WW) modeset(0): Page flip failed: No such device or address
[ 23.879] (EE) modeset(0): present flip failed
[ 23.897] (WW) modeset(0): Page flip failed: No such device or address
[ 23.897] (EE) modeset(0): present flip failed
[ 23.912] (WW) modeset(0): Page flip failed: No such device or address
[ 23.912] (EE) modeset(0): present flip failed
[ 23.928] (WW) modeset(0): Page flip failed: No such device or address
[ 23.928] (EE) modeset(0): present flip failed
[ 23.956] (WW) modeset(0): Page flip failed: No such device or address
[ 23.956] (EE) modeset(0): present flip failed
[ 23.978] (WW) modeset(0): Page flip failed: No such device or address
[ 23.978] (EE) modeset(0): present flip failed
[ 23.995] (WW) modeset(0): Page flip failed: No such device or address
[ 23.995] (EE) modeset(0): present flip failed
[ 24.011] (WW) modeset(0): Page flip failed: No such device or address
[ 24.011] (EE) modeset(0): present flip failed
[ 24.027] (WW) modeset(0): Page flip failed: No such device or address
[ 24.027] (EE) modeset(0): present flip failed
[ 24.044] (WW) modeset(0): Page flip failed: No such device or address
[ 24.044] (EE) modeset(0): present flip failed
[ 24.094] (WW) modeset(0): Page flip failed: No such device or address
[ 24.094] (EE) modeset(0): present flip failed
[ 24.119] (WW) modeset(0): Page flip failed: No such device or address
[ 24.119] (EE) modeset(0): present flip failed
[ 40.786] (WW) modeset(0): Page flip failed: No such device or address
[ 40.786] (EE) modeset(0): present flip failed
Do you mean your config or DarkOrbs?Do you use the same config?
Use Lakka's config
I just got a new SD card today, and it didn't work either?I've tried using Etcher, Win32DiskImager, DD, and building the partition table myself and none of that has worked so far.