B point issue after modding Switch OLED

[Wyte47]

I have the same issue though slightly different. the diode closest to the b point only gives me a reading on one side but the side closer to the b point gives me 0V. Any ideas?

 

[BullsOfLime]

I have the same issue though slightly different. the diode closest to the b point only gives me a reading on one side but the side closer to the b point gives me 0V. Any ideas?

I have the same behaviour. Did you try installing the board and see if it works?

Edit:// Having the same issue, but the installation works perfectly!

 

[randy_w]

B point diode reading is around 1-2V, some multimeters won't even register and will show ol instead.

 

[Wyte47]

I have the same issue though slightly different. the diode closest to the b point only gives me a reading on one side but the side closer to the b point gives me 0V. Any ideas?

I forgot to reply back to this I had fixed the issue which interestingly enough it had something to do with the connection on the processor and the ribbon, after reapplying some time to this area and the B point I got everything working. One thing I realised fortunately the Board shorts out but there wasn't full contact with the ribbon and the processor.