You could have accidentally flashed the clean NAND. Try repeating the process again to make sure you didn't miss any steps and to make sure you aren't flashing the wrong NAND back to the system.
i already tried that, i also tested to repatch the original nand on an other computer ( im using windows 10) but still the same
--------------------- MERGED ---------------------------
i don't understand whats going on
--------------------- MERGED ---------------------------
i don't understand whats going on
nothing, i tried start too :/
--------------------- MERGED ---------------------------
you know, thats weird because now the md5 is different from the original ( same as the patched nand that i have on my computer tho )
--------------------- MERGED ---------------------------
it means that there is no error, i flashed the "NAND-patched.bin" and it has been successfully flashed
--------------------- MERGED ---------------------------
you know, thats weird because now the md5 is different from the original ( same as the patched nand that i have on my computer tho )
--------------------- MERGED ---------------------------
it means that there is no error, i flashed the "NAND-patched.bin" and it has been successfully flashed
You can actually edit your posts if you have new information.
So did you make sure you used the right files for your system and OFW?
I am not actually familiar with the hardmod method, so the best I can do is basic troubleshooting. Which hopefully will help someone more knowledgeable when accessing the situation.
So did you make sure you used the right files for your system and OFW?
I am not actually familiar with the hardmod method, so the best I can do is basic troubleshooting. Which hopefully will help someone more knowledgeable when accessing the situation.
thanks for your kind help 
idk why i have that problem, i even watched videos to see if i was doing something wrong but i don't see anything.
At first i thought my .firm was not the good one but i redownloaded the "2.54-0_11.4_OLD.firm" for 11.5 O3DS XL. still nothing ...
--------------------- MERGED ---------------------------
If you guys need a video to see what im doing, i can make it
idk why i have that problem, i even watched videos to see if i was doing something wrong but i don't see anything.
At first i thought my .firm was not the good one but i redownloaded the "2.54-0_11.4_OLD.firm" for 11.5 O3DS XL. still nothing ...
--------------------- MERGED ---------------------------
If you guys need a video to see what im doing, i can make it
Last edited by Samlake,
Hello !
I tried with an other 3ds ( the o3ds non xl) it was a pain in the a** to solder but it worked and b9s and luma are now installed on it. Well, idk why that doesn't work on my o3ds xl...
I tried with an other 3ds ( the o3ds non xl) it was a pain in the a** to solder but it worked and b9s and luma are now installed on it. Well, idk why that doesn't work on my o3ds xl...
Success ! I updated to 11.6 then hardmod and patch the 11.6 nand, it is now working !
