Hello,
i started to use my 3.0.0 switch again and installed cfw with hekate and atmosphere but noticed that my battery hold only charge for half an hour or so and i wonder why because i almost never used this switch before.
I looked at the battery info in hekate in console info and saw that the design capacity says something with 4xxx mAh but the actual full capacity is 13xx mAh and it says age 28% so 28% wear? which is odd cause it was only used for like mariokart a few hours before i got my 2nd switch then the switch was put in the box turned off for half an year or so.
and another thing i noticed is that hekate says 0% battery even tho the battery is at 3,8v-3,9v which isn't normal because a li-ion battery can be has capacity left untill arround 3,0v
im going to put a picture of the battery menu thingy here.
I had already tried the battery desync fix before but it somehow made it worse and now im stuck with this. should i just unplug the battery for a few seconds and see again or measure with a multimeter if the voltage readout is correct?
i started to use my 3.0.0 switch again and installed cfw with hekate and atmosphere but noticed that my battery hold only charge for half an hour or so and i wonder why because i almost never used this switch before.
I looked at the battery info in hekate in console info and saw that the design capacity says something with 4xxx mAh but the actual full capacity is 13xx mAh and it says age 28% so 28% wear? which is odd cause it was only used for like mariokart a few hours before i got my 2nd switch then the switch was put in the box turned off for half an year or so.
and another thing i noticed is that hekate says 0% battery even tho the battery is at 3,8v-3,9v which isn't normal because a li-ion battery can be has capacity left untill arround 3,0v
im going to put a picture of the battery menu thingy here.
I had already tried the battery desync fix before but it somehow made it worse and now im stuck with this. should i just unplug the battery for a few seconds and see again or measure with a multimeter if the voltage readout is correct?